MINI2 - MINI Forum - View Single Post - Please post your 0-60 or 1/4 mile times here, all MINI models/specs.

Mugami · Oct 26th, 2004, 05:13 AM

Just did a few last runs after Downloading the lastest Firmware from G-tech which include a higher sampling rate amoung other fine tuning for the G-tech competition. Also due to bending 2 of the Centerline Impulse(11.5lbs) rims i ordered new Voluction(16.lbs) rims which added 4 lbs per rim to the car. Also running (new) 205/40/17 Nexen N3000 tires vs (old) 215/40/15 Cooper Zenons. On the chart Run 3 is using the old software which even i claim was optimistic by up to .5 and on the new runs the EST 1/4 i mark on the test track would end before the G-tech did so i was chopping the throttle before it was over then getting back on it. Also had full interior with 110 lbs sub box in the back so im pls with the results

Oct 26th, 2004, 05:13 AM	#50
Mugami MINI2 Master Join Date: May 2002 Local Time: 08:13 AM Posts: 1,215 Offline	Just did a few last runs after Downloading the lastest Firmware from G-tech which include a higher sampling rate amoung other fine tuning for the G-tech competition. Also due to bending 2 of the Centerline Impulse(11.5lbs) rims i ordered new Voluction(16.lbs) rims which added 4 lbs per rim to the car. Also running (new) 205/40/17 Nexen N3000 tires vs (old) 215/40/15 Cooper Zenons. On the chart Run 3 is using the old software which even i claim was optimistic by up to .5 and on the new runs the EST 1/4 i mark on the test track would end before the G-tech did so i was chopping the throttle before it was over then getting back on it. Also had full interior with 110 lbs sub box in the back so im pls with the results Attached Thumbnails 02 MCS DS/W (Totaled November 02 on Fall Folage Run) 03 MCS DS/W (See my MINI Profie for extensive list of mods)