MINI2 - MINI Forum - View Single Post - Aero Grill for Stock MCS Bumper

onemini · Dec 6th, 2004, 04:04 PM

Quote: Originally Posted by LordNikon

AM I right in thinking that if you cut the bumper to slot the aero bottom section in, you wouldn't have to remove the bumper ???

This job would be impossible without removing the bumper. You need to release the lower piece of chrome from behind. I also had to cut off the side tabs as they pushed against the metal 'under bumper' when I first offered the completed section up to the car.

I'll go into detail about this if anyone wants.

Jonathan

Dec 6th, 2004, 04:04 PM	#45
onemini MINI2 Senior Join Date: Jan 2003 Location: West Sussex Local Time: 02:39 AM Posts: 549 Offline	Quote: Originally Posted by LordNikon AM I right in thinking that if you cut the bumper to slot the aero bottom section in, you wouldn't have to remove the bumper ??? This job would be impossible without removing the bumper. You need to release the lower piece of chrome from behind. I also had to cut off the side tabs as they pushed against the metal 'under bumper' when I first offered the completed section up to the car. I'll go into detail about this if anyone wants. Jonathan