MINI2 - MINI Forum - View Single Post - Pulley change - ECU or No ECU upgrade? Newbie needs help, please.

lwlam · Jan 12th, 2005, 12:00 AM

I think I understand the general opinion: if you're going to do the pulley, then do the ECU as well. Sounds like there is no real detriment to doing the pulley alone, but the additional gains make an ECU upgrade worthwhile.

I have read that the older versions of OneCLick would cause the EML light to come on and the engine would stall at higher RPMs. Does this still occur or has this issue been addressed?

Jan 12th, 2005, 12:00 AM	#5
lwlam MINI2 Regular Join Date: Jan 2005 Location: Los Angeles, CA Local Time: 04:13 PM Posts: 54 Offline	Wow! Thanks for the quick replies. Followup on One Click. I think I understand the general opinion: if you're going to do the pulley, then do the ECU as well. Sounds like there is no real detriment to doing the pulley alone, but the additional gains make an ECU upgrade worthwhile. I have read that the older versions of OneCLick would cause the EML light to come on and the engine would stall at higher RPMs. Does this still occur or has this issue been addressed?