MINI2 - MINI Forum - View Single Post

6f7 · Oct 12th, 2002, 08:32 PM

Quote:

Originally posted by johnlummis
Look at a Mini with the aerokit on it,especially the front bumper,look underneath the front part of the bumper and you will see a part that is only about 4" from the ground,lower that 30mm and you have less than 3" clearance.

I have heard the piece hit bottom a few times in the six months I've been driving. It isn't often, but three good hits was enough to damage it. It now has a small 4" crack where it meets the underside of the bumper in the center. I saw the same crack on another aero kit. That part is bound to get beat up more if it is any lower. What is the reason behind that part hanging down? Maybe you could cut it off If your going to drop your MINI.

Oct 12th, 2002, 08:32 PM	#5
6f7 MINI2 Regular Join Date: Apr 2002 Local Time: 10:56 AM Posts: 262 Offline	Re: Lowered with aero kit Quote: Originally posted by johnlummis Look at a Mini with the aerokit on it,especially the front bumper,look underneath the front part of the bumper and you will see a part that is only about 4" from the ground,lower that 30mm and you have less than 3" clearance. I have heard the piece hit bottom a few times in the six months I've been driving. It isn't often, but three good hits was enough to damage it. It now has a small 4" crack where it meets the underside of the bumper in the center. I saw the same crack on another aero kit. That part is bound to get beat up more if it is any lower. What is the reason behind that part hanging down? Maybe you could cut it off If your going to drop your MINI.