| i found the control module, on the firewall to the left; a white/red yellow dots wire goes from the harness bundle at the left to the module.
i spliced to that one as i didn't find another white/red yellow dots wire.
programming the five blinks works. re-powering, i get the five confirming blinks, but then when pressing the mode button, the left led will blink, but not stay lit, then the right led stays lit, and it will go out when given an IR command from the hu remote...then the left led blinks, etc. no way to get the left led to stay lit for acccepting a swb command.
john 
Last edited by jlm; Oct 26th, 2002 at 02:08 PM.
| 
