MINI2 - MINI Forum - View Single Post

PARTSMAN109 · Apr 18th, 2006, 06:04 PM

Quote: Originally Posted by roland2003

There is a 'black hole' in spacer width between around 7mm & 13mm, where it is too thick to be plain disc yet to thin to be spigoted (hubcentric). I had the pleasure of cutting another companys 10mm thick wheel spacer for a TT in half to prove the point ,at the thinest point the wall section was .016" (0.4mm ) thick!

So what's the safest way to run a 10mm spacer?

Apr 18th, 2006, 06:04 PM	#6
PARTSMAN109 BMW/MINI parts Join Date: May 2005 Location: Westerly, RI Local Time: 08:12 PM Posts: 60 Offline	Quote: Originally Posted by roland2003 There is a 'black hole' in spacer width between around 7mm & 13mm, where it is too thick to be plain disc yet to thin to be spigoted (hubcentric). I had the pleasure of cutting another companys 10mm thick wheel spacer for a TT in half to prove the point ,at the thinest point the wall section was .016" (0.4mm ) thick! So what's the safest way to run a 10mm spacer? 2003 MCS DS/DS