John - once again thanks for this thread - v.useful information. Can I ask you to post the ride heights from the centre of the rubber jacking blocks? I believe you're using the lowest part of the rubber block. I have deformed blocks (too much jacking!) and there's a nylon locater in the centre of the block which goes into the chassis and is more likely to be a consistent fit relative to the chassis. Sorry, but I do find your measurements very time saving - thanks for doing the work!
I have just put Eibach springs on and will measure the height and camber (Smartcamber) and post as soon as I get a chance.
The rear concerns me - I'm not allowed to resort to adjustable arms so that camber on the rear may be an issue. |