Content Wrapper

[T-bone S]

Quote: Originally Posted by Root Ginger (original)

Technically they should probably be replaced before the light comes on.

Remember that the less pad you have the less area you have to dissipate heat = more likely to experience brake fade. Also the more heat the quicker the pad will wear.

The minimum recommended thickness of pads is 3mm. I don't know at what level the warning light comes on.

ditto - just had mine done front & rear - was done before the light came on - has started to feel it a little in the pedal. If the light comes on you'll also have to pay a little more to have the sensor replaced too.