Hello,
Just wondering if anyone could offer their help. I've a BMC CDA Air Filter that was fitted to my previous car (VW Polo GTi) I was wondering if it is possible to fit this to my Cooper S?
The model of the kit is as follows:
Code :
CDA70-130
D1 (mm)D2 (mm)L1 (mm)70130185
SUGGESTED UP TO 1.600 CC
On the
BMC website it says the kit I have will fit the 1.6 One and there is a seperate version intended for the Cooper S which has the following dimensions:
Code :
CDASP-10 D1 (mm)D2 (mm)L1 (mm)70150160
D1 is the connection to the engine which is the same on both filters, D2 is the width of the filter and L1 is the length of the filter. It appears that the model I have will connect to the car but with the length being 25mm longer will I run into problems? By looking in the engine bay it appears to fit!?!
Also after I've removed the standard airbox where do I go about attaching the battery terminal? Do I simply leave it hanging? Is there anything else that would need securing?
Thanks in advance for any helpful advice!
Mark
