Content Wrapper

[Revolution Mini Works]

Quote: Originally Posted by MINIMANIAUK (original)

DYNO TODAY AT 1320 AUTOS
At last got onto the rollers at Pauls , and I am very pleased with the results despite having the too small 58mm throttle fitted and smaller intake the Opcon made 260bhp and it will make the required 300 bhp with ease
The fuel needs mapping as it is out and this will only improve the numbers
as an indication the max boost was only 15psi ,despite this only 10 degree shift in intake temp from idle to max rpm so a lot more to come
10 psi boost at 2000 rpm !!!! (more than Eaton at max)so very very good low torque will result ,torque held up to over 6500 rpm and will extend further up with correct throttle
I fully expect to get to 325 bhp in my own car .maybe more!!
As a bonus it looks like a 275 option needs less components for a kit and will be cheaper than first reckoned
After so much theorising its nice to see the theory become reality ,I think it will exceed my expectations and perform better than i expected -a true 275 and 300 bhp kit that get 275 +and 300 + on the dyno
every time,hot day ,cold day , any day , and hold torque throughout the rpm range-RESULT!!
Many thanks to Paul and 1320 autos

great to hear... what correction factor are you running to get 260bhp?
thanks