Hi,Yes I think we can (and therefore will
) have 2 position camber. There will be 2 sets of bolt holes in the flange . I hanvt got the r53 at home today but I think the centre hole in the tower will be big enough to allow you change between the 2 settings without removing the struts.
If we want to get clever we can even design another version with adjustable ride height ..or at least 2 position height quite easily. We could have say -12mm. The reason I say -12mm is its possible to reduce ride height on the rear by 12mm too. Therefore you could lower 12mm all round and still be on stock springs!
Anyway that parts for another day... Ive got coilovers which have adjustable height.
..off to make my 'fag packet drawings' (I dont smoke
) into proper ones now.
We will be making 12 sets on the initial batch.
Best Regards Roland GTT
