MINI2 - MINI Forum - View Single Post

Vecchio Engineering · Nov 12th, 2007, 09:10 PM

It is able to seal around the mating ring by clipping over it. It is impossible for the ITG filters to move or unclip because there is a rectangular indentation at the end of the filter where the OEM plastic bracket inserts, then it screws into the underside of the filter box with a philips screw. I've added a link to Nebdingo's wonderful post regarding the install of the ITG JCW filter which highlights the above perfectly.

http://www.mini2.com/forum/john-coop...ide-noobs.html

Nov 12th, 2007, 09:10 PM	#6
Vecchio Engineering MINI2 Sponsor Join Date: May 2007 Location: VECCHIO.CO.UK Local Time: 08:47 PM Posts: 156 Offline	It is able to seal around the mating ring by clipping over it. It is impossible for the ITG filters to move or unclip because there is a rectangular indentation at the end of the filter where the OEM plastic bracket inserts, then it screws into the underside of the filter box with a philips screw. I've added a link to Nebdingo's wonderful post regarding the install of the ITG JCW filter which highlights the above perfectly. http://www.mini2.com/forum/john-coop...ide-noobs.html