[MINI-Morgan]

Afternoon! Any pics? I tried it but I only ever ended up blocking the last row on the intercooler with foam.

Maybe if a strong foam was glued around the back to the same height as the sides and then spacers put in the intercooler tray/ducting in the bonnet to lower it a bit to make a better seal.

But then in all the testing I did there was never any problems with heat as the intercooler angled as it is will always trap air on each row and cool it. Obviously the better seal the more air thats forced down each row but even with a peak of 19psi I never had a problem.