View Single Post
Old Mar 23rd, 2008, 08:51 AM   #8
JME
MINI2 Regular
 
Join Date: Oct 2003
Location: Canberra, Australia
Local Time: 10:40 AM
Posts: 137
Offline
I have fixed this now. For future reference this is what I did:
* Removed the intercooler cover (four torx screws)
* Undid the intercooler bellows (four torx screws at each end)
* Removed both intercooler brackets (two torx screws each)
* Pushed the intercooler to one side then slide it out to remove
* Heated the new pipe by running under hot water then seperated the two sections
* Replaced the small section of pipe on the car
* Re-installation was the reverse of removal
Australia   Reply With Quote