Content Wrapper

[Matblack]

Quote: Originally Posted by ScottyBoy (original)

http://www.mini2.com/forum/faq.php?f..._faq_aux_input

Hear you go, its in the FAQ & DIY Section above.

Scott

Thanks Scott

Thats the guide for a LHD install but it is useful, I've just done the aux on my RHD Works and it is very much along the same lines, however most things I find say you have to remove the radio to get to the connection on a RHD.

In actual fact this isn't the case. By following the guide for removing the glove box you can get similar access than removing the bolster on a LHD car, from that point its exactly the same as the guide you linked to

I think its worth putting this info in the FAQ? I was quite put off adding the aux because I didn't want to decapitate my gear stick and muck about with the centre console. Taking the glove box out is 100% easier and a lot quicker, 5 screws and the air con valve are all you have to worry about, I went with a ninja install and put the aux port on a very convenient little push out in the glove box it keeps everything nice and neat

MB