Here is what the intake looks like now with the bracket that I have made. The bracket is made by bending and polishing a piece of 30mm aluminium. The pipe is 3" aluminium pipe that has been polished and attached to 3"silicone elbow. The filter is a 3" K@N dual cone.
And this is the way it sounds like in the car, initially I am driving at normal everyday spend and acceleration levels. Then I have opened it up a bit in an area of sufficient speed limit so you can hear the bypass valve and the turbo gulping the air in. During this video the drivers window was open and it was filmed from the passenger seat.
