MINI2 - MINI Forum - View Single Post - Seat pre-tensioners! what a nightmare!!!

NeuroBeaker · Apr 17th, 2008, 02:08 PM

Quote: Originally Posted by Bonnie Scotland (original)

Weld a bolt onto what's left of the torx head, that's what i did

But be careful not to set the car on fire in the process...

If all else fails, this sounds like a pretty extreme solution - but sounds like it would work.

But I'm a pretty poor authority on DIY, so I'll pipe down again...

All the best,
Andrew.

Apr 17th, 2008, 02:08 PM	#13
NeuroBeaker Where's my navigator?! Join Date: Feb 2007 Location: Behind the wheel Local Time: 04:22 PM Posts: 6,121 Offline	Quote: Originally Posted by Bonnie Scotland (original) Weld a bolt onto what's left of the torx head, that's what i did But be careful not to set the car on fire in the process... If all else fails, this sounds like a pretty extreme solution - but sounds like it would work. But I'm a pretty poor authority on DIY, so I'll pipe down again... All the best, Andrew. NeuroBeaker - Proud owner of "Zeus" (a 'slightly modified' 2004 MINI ONE). *WARNING!* Thesis writing in progress. Experiments continue. Multi-tasking? Explosion imminent!