my
mcs creaks from drivers side window over bumps, its the glass rubbing against the rubber because if i lower window slightly its quiet. i think the window needs raising a few mm to seal tight against the rubber.
i have adjusted it laterally with the torx bolts under the rubber covers at the bottom of the door but it still needs raising
has anyone adjusted there's, if so how, i know the door trim has to come off and i have read about holes in the glass and two adjusted bolts the other side of these holes. this is was for the 1st gen though
i could go to dealer but if its a easy fix will do it myself dont fancy them ripping my door card to pieces
any help appreciated
