MINI2 - MINI Forum - View Single Post

Jaw_F430 · Sep 3rd, 2008, 09:39 PM

The tool is easy to make really. I made one when I first did my pulley swap(MED pulley).

But if you don't want to make a tool the is another way using a block of wood and a pry bar I think. Someone posted it on NAM so have a look on there.

I did mine the other day (when fitting the altaV2) pulley by driving up on ramps so I could flick the belt on at the bottom easily. Didn't have to take the inner arch out

Sep 3rd, 2008, 09:39 PM	#6
Jaw_F430 M3 CSL Join Date: Jul 2007 Location: 7600rpm Local Time: 02:57 AM Posts: 736 Offline	The tool is easy to make really. I made one when I first did my pulley swap(MED pulley). But if you don't want to make a tool the is another way using a block of wood and a pry bar I think. Someone posted it on NAM so have a look on there. I did mine the other day (when fitting the altaV2) pulley by driving up on ramps so I could flick the belt on at the bottom easily. Didn't have to take the inner arch out Stock Cooper S @270+BHP 13.7@103.9 www.minitorque.com ULTIMATE BMW SHOW 21st Sept 2008- Santa Pod Raceway