MINI Cooper Forum - MINI2 Mini Cooper Forums - View Single Post - Pulley supplier & fitter.
Mini2.com Forum Header Mini2.com Forum Header
» Premium
» Auto Insurance
» Featured Product
» Wheel & Tire Center

Go Back   MINI Cooper Forum - MINI2 Mini Cooper Forums

Please Visit our Site Sponsors
Mini2.com is the premier BMW Mini Forum on the internet. Registered Users do not see the above ads.
View Single Post
  #3 (permalink)  
Old Oct 1st, 2008, 12:13 PM
Richard Crofts's Avatar
Richard Crofts
THE STICK
Offline
 
Join Date: Feb 2003
Location: Worcestershire WR15
Posts: 3,904
Local Time: 05:24 AM
United Kingdom Male View Richard Crofts's Dark Silver & Black 1st Gen MINI Cooper S Profile View Richard Crofts's Classified Ads
Yep

ThinkMini, unit 3, castle farm, holt, worcestershire wr3 6nj

www.thinkmini.co.uk
info@thinkmini.co.uk

01905 620 011

The answer machine is giving them gip at the moment so keep trying if it seems to ring out and then cut you off.

They are 10 mins from j5 and j6 of the M5. Very good, knowledgable and with the added bonus that Adrian the main tech there is a former BMW and MINI technician. They have some mint kit too for providing all sorts of work from service, to road tests, to engine det checks, compression tests and many tuning options.

They are GTT suppliers and fitters, they also do other options (15%s and stuff) if you speak to them. For a glance at thier work check out the thread about Bhozars summer project on here...they did that for him.

nothing but praise from me both since they became thinkmini and from before when adrian and dave would work on my car as a favour.

They will probably be no more than an hour drive from you depending where in Warks you are. Quite possibly they will be even less if your on the edge near to worcestershire!

PS if your there they have wifi facilities and stuff so you can do work or surf the forums while you wait. They also have there demo car bert to have a gander aroun, and check out Daves porshe wheeled and braked S if he has brought it to work!
Reply With Quote
Thanks for this post from:
 
Powered by vBadvanced CMPS v3.1.0

All times are GMT. The time now is 05:24 AM.



Powered by vBulletin® Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.