View Single Post
Old Jul 16th, 2004, 02:31 PM   #7
northandy
MINI2 Privilege Member Has met Quack Quack Jack
AWOL
 
northandy's Avatar
 
Join Date: Jan 2003
Local Time: 10:24 PM
Posts: 14,328
Offline
Quote: Originally Posted by kapps
There are many different bedding in procedures. As he installed EBC green stuff ( a slightly high performance pad), hard braking probably was his best bet. The idea is to warm up the brakes then do some near lock-up stops from about 70 to 10 (not completely stopping). Very high performance setups actually require this be done a few times to completely bed them in. Here's a link on bedding in brakes: http://www.zeckhausen.com/bedding_in_brakes.htm

Ok.... i did wonder !.... I could imagine that being the case with Redstuff pads and 6 pot's with floating disks, just wasnt sure with a fast road setup that would be the case
England View northandy's Electric Blue & White 1st Gen MINI Cooper S Profile   Reply With Quote