| deanmosh May 23rd, 2011, 09:22 PM i had a thread going earlier with quetsions about installing an amp and sub, i was able to figure it all out on my own, but i was wondering if anyone could help me with the turn on lead. I need to find a turn on lead for my amp. i have my amp situated in the boot. my boost hU doesnt have one.. deanmosh May 23rd, 2011, 10:07 PM gb mini told me that i could wire it to the antenna amp. does this mean that the ant. amp 12 v running to it somewhere? thanks in advance for any help. __kyle__ May 23rd, 2011, 10:40 PM If you have connected your amp to the battery, you then need to ensure its been suitably earthed and that the remote is connected. The remote is a wire that runs from your head unit to your amp! deanmosh May 23rd, 2011, 10:56 PM the problem is that i have a boost head unit that doesnt have a remote connection. also, i am connecting the amp via the rear speaker signals, so im trying to avoid the head unit. any other methods or wiring the remote? gatrell2010 Jul 7th, 2011, 08:44 PM dont know if you have sorted this yet but all i did was to run the remote cable to the 12V lighter socket in the boot... easy | ||