Hi, hope this is the right part of the forum.

i would like some one to point me into the right direction. into how to wire these seats up. i seen this same heated seats kit used by another mini member. forgot the site now.

WIRING:
i need the wire this loom to the Heated seats. i know how to get started with power but the rest is a black hole as the seats have 4 wires coming from it. 2 small and 2 big. (is this something to do with the seats have 3 heat setting on the factory Switch panel, does this control the voltage going to the seats OR IS THE SMALLER 2 WIRES FOR THE TOP OF THE SEAT AND THE BIG 2 WIRES FOR THEE BOTTOM OF THE SEAT. the loom has 2 sitting vs factory 3 settings) the Loom has to big wires and 1 medium.


http://i207.photobucket.com/albums/bb185/willbehunters/miniseats.jpg


http://i207.photobucket.com/albums/bb185/willbehunters/miniseats5.jpg
^Retro loom has 3 wires.

http://i207.photobucket.com/albums/bb185/willbehunters/miniseats4.jpg
3 wires. And positive and Ground. i know how to hook the ground and positive up.

http://i207.photobucket.com/albums/bb185/willbehunters/miniseats3.jpg
this where iam confused should i wire:
Red to Red
Black to brown
yellow to blue and green
or is green earth ??
does someone know what they are for ?

http://i207.photobucket.com/albums/bb185/willbehunters/miniseats2.jpg

http://i207.photobucket.com/albums/bb185/willbehunters/miniseats1.jpg

^here is where the seat wiring loom comes from.