MINI2

meenieme · May 9th, 2007, 03:53 AM

I am looking to do the pulley mod and how much should i be looking at paying to have the pulley installed ? can anyone recommend some workshops in sydney that is able to fit the reduction pulley ?
cheers

im_dave · May 9th, 2007, 04:03 AM

I'm planning to do this too in mid June when I get back to Sydney. I know of two places - Peak Performance in Paramatta will do it for around 5-600 if i remember correctly. Euromini's uncle's workshop said around 300.

Some of the other guys have DIY'd it!

Gr1zzLy · May 9th, 2007, 05:18 AM

Yup, just DIY. Save you a few more $ for other mods.

All you need is the pulley removal tool, and a belt tensioner tool. The belt tensioner tool is optional, but the pulley removal tool is a must. However, having said that though, the belt tensioner tool definitely helps as it's a real pain to get the belt back on.

ciza · May 9th, 2007, 10:00 AM

Depends where in Sydney u live if Brookvale way then call

Bromspec Motor Works

ask for Alastair ph 02 99394980

19 orchard rd
brookvale

cheaper if you have your own pulley and I would also install a new belt at the same time
why not go the whole hog and get a oil and filter service.

regards
ciza

meenieme · May 10th, 2007, 02:21 AM

thanks guys for all the quick replies. I'm not really game enough to do it myself. i will be having my pulley installed at Euromini's uncles workshop. will let you guys know how it all goes.

May 9th, 2007, 03:53 AM	#1
meenieme MINI2 Newbie Join Date: Aug 2006 Local Time: 06:04 AM Posts: 42 Offline	Where in sydney to get pulley installed I am looking to do the pulley mod and how much should i be looking at paying to have the pulley installed ? can anyone recommend some workshops in sydney that is able to fit the reduction pulley ? cheers

May 9th, 2007, 04:03 AM	#2 (permalink)
im_dave trust me, I'm a doctor... Join Date: Jan 2004 Location: Melbourne Local Time: 07:04 AM Posts: 245 Offline	I'm planning to do this too in mid June when I get back to Sydney. I know of two places - Peak Performance in Paramatta will do it for around 5-600 if i remember correctly. Euromini's uncle's workshop said around 300. Some of the other guys have DIY'd it! long live the supercharger

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Cheapest Place in Sydney for Pulley install	wrecky	Australia	77	Sep 12th, 2006 04:26 AM
Anyone got a S/C pulley Puller in Sydney?	ChilliRedS	Australia	108	May 26th, 2006 10:54 AM
Pulley Installed!!!!!!!!!	Tigger	Engine & Drivetrain Tuning	72	Jun 15th, 2005 01:37 PM
19% Pulley in Sydney	Tigger	Engine & Drivetrain Tuning	56	May 31st, 2004 04:08 PM

MINI2

Fuel for your MINI obsession

For Australian social and region specific discussion

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

May 9th, 2007, 05:18 AM	#3 (permalink)
Gr1zzLy Crapping in the woods... Join Date: Jun 2005 Location: Sydney Local Time: 07:04 AM Posts: 1,754 Offline	Yup, just DIY. Save you a few more $ for other mods. All you need is the pulley removal tool, and a belt tensioner tool. The belt tensioner tool is optional, but the pulley removal tool is a must. However, having said that though, the belt tensioner tool definitely helps as it's a real pain to get the belt back on.

May 9th, 2007, 10:00 AM	#4 (permalink)
ciza MINI2 Newbie Join Date: Nov 2005 Local Time: 06:04 AM Posts: 14 Offline	Depends where in Sydney u live if Brookvale way then call Bromspec Motor Works ask for Alastair ph 02 99394980 19 orchard rd brookvale cheaper if you have your own pulley and I would also install a new belt at the same time why not go the whole hog and get a oil and filter service. regards ciza

May 10th, 2007, 02:21 AM	#5 (permalink)
meenieme MINI2 Newbie Join Date: Aug 2006 Local Time: 06:04 AM Posts: 42 Offline	thanks guys for all the quick replies. I'm not really game enough to do it myself. i will be having my pulley installed at Euromini's uncles workshop. will let you guys know how it all goes.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)