MINI2

Mini360 · May 21st, 2008, 04:29 AM

Hey everyone,

I finally got my finger out and now looking towards a few RMW goodies.

the following i will be purchasing:

RMW Header
RMW head
Head studs
head gasket
17% pulley
535 belt
RMW camshaft
RMW 440cc Injectors
RMW custom tune

hope it makes my mini good hard!!!!!, i also have a Milltek sport header that will be replaced with the RMW one, anyone intrested on the header pm me!!

Darrin · May 21st, 2008, 11:37 AM

Lucky bugger - RMW seems to be getting great results!

Where are you getting the custom tune done?

Mini360 · May 21st, 2008, 12:02 PM

Quote: Originally Posted by Darrin (original)

Lucky bugger - RMW seems to be getting great results!

Where are you getting the custom tune done?

At Peak Performance in Parramatta

Jan is doing a Remote tune for me

D-MAN · May 21st, 2008, 08:58 PM

Quote: Originally Posted by Mini360 (original)

At Peak Performance in Parramatta

Jan is doing a Remote tune for me

Peak don't have a dynapak dyno...may be a problem with the remote tune...may not....

Mini360 · May 21st, 2008, 10:29 PM

thanks champ!

i will find out if it will work

scolburn79 · May 22nd, 2008, 05:15 AM

Like I keep saying, I will have a better chance at getting him over here if I can get a lot more people together for a group tune. I spoke to him yesterday and he is very seriously considering coming over. Even if you don't want to drive up here, if you get a group together and each of you chip in for his air fare from Brisbane you are still getting a very cheap but the ultimate tune. Considering a tune over here will cost you about $1000 anyway, and that is for someone that really doesn't know the mini. I have already told him that I will pay for his flight from the USA, but if someone else wants to help chip in that would be great. So spread the word people.

D-MAN · May 22nd, 2008, 06:16 AM

I would imagine that there would be quite a few guys in Sydney who would attend a Jan tuning session.
If he is seriously considering coming down under I can get numbers for Sydney!

scolburn79 · May 22nd, 2008, 07:02 AM

Yes, please spread the word around. Once I tell him how many people you have got together I might be able to pin him down to a date. He is very busy with his developments and race season commitments but he told me that he is very keen to come over.

Darrin · May 22nd, 2008, 07:07 AM

Quote: Originally Posted by D-MAN (original)

I would imagine that there would be quite a few guys in Sydney who would attend a Jan tuning session.
If he is seriously considering coming down under I can get numbers for Sydney!

You can definitely add me to that list!

scolburn79 · May 22nd, 2008, 08:26 AM

OK, I am going to open up a new thread about this and I will create a list and we will go from there.

May 21st, 2008, 04:29 AM	#1
Mini360 MINI2 Regular My Classifieds Join Date: Nov 2006 Local Time: 09:55 PM Posts: 76 Offline	Cant wait im going RMW!!!!!!! Hey everyone, I finally got my finger out and now looking towards a few RMW goodies. the following i will be purchasing: RMW Header RMW head Head studs head gasket 17% pulley 535 belt RMW camshaft RMW 440cc Injectors RMW custom tune hope it makes my mini good hard!!!!!, i also have a Milltek sport header that will be replaced with the RMW one, anyone intrested on the header pm me!!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RMW Rotrex SC 291.2WHP	Longboard 2	Engine & Drivetrain Tuning	22	May 19th, 2008 09:28 PM
RMW Power Pack Arrives	BigShow	Engine & Drivetrain Tuning	48	Apr 18th, 2008 07:22 PM
RMW (Jan) Tune - Best mod by far	Bzzz Bom	Engine & Drivetrain Tuning	78	Dec 30th, 2007 01:26 AM
Wait, Wait Don't Tell Me--A Tale of Future MINI Production?	karmuze	General Discussion	17	May 28th, 2002 01:27 AM

MINI2

Fuel for your MINI obsession

For Australian social and region specific discussion

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

May 21st, 2008, 11:37 AM	#2 (permalink)
Darrin Mighty Mouse Join Date: Feb 2007 Location: Maitland Local Time: 09:55 PM Posts: 98 Online	Lucky bugger - RMW seems to be getting great results! Where are you getting the custom tune done?

May 21st, 2008, 12:02 PM	#3 (permalink)
Mini360 MINI2 Regular My Classifieds Join Date: Nov 2006 Local Time: 09:55 PM Posts: 76 Offline	Quote: Originally Posted by Darrin (original) Lucky bugger - RMW seems to be getting great results! Where are you getting the custom tune done? At Peak Performance in Parramatta Jan is doing a Remote tune for me

May 21st, 2008, 08:58 PM	#4 (permalink)
D-MAN MINI2 Regular My Classifieds Join Date: Feb 2008 Local Time: 09:55 PM Posts: 97 Offline	Quote: Originally Posted by Mini360 (original) At Peak Performance in Parramatta Jan is doing a Remote tune for me Peak don't have a dynapak dyno...may be a problem with the remote tune...may not....

May 21st, 2008, 10:29 PM	#5 (permalink)
Mini360 MINI2 Regular My Classifieds Join Date: Nov 2006 Local Time: 09:55 PM Posts: 76 Offline	thanks champ! i will find out if it will work

May 22nd, 2008, 05:15 AM	#6 (permalink)
scolburn79 Forever Modding!! My Classifieds Join Date: Aug 2007 Location: Brisbane, Northside Local Time: 08:55 PM Posts: 125 Offline	Like I keep saying, I will have a better chance at getting him over here if I can get a lot more people together for a group tune. I spoke to him yesterday and he is very seriously considering coming over. Even if you don't want to drive up here, if you get a group together and each of you chip in for his air fare from Brisbane you are still getting a very cheap but the ultimate tune. Considering a tune over here will cost you about $1000 anyway, and that is for someone that really doesn't know the mini. I have already told him that I will pay for his flight from the USA, but if someone else wants to help chip in that would be great. So spread the word people.

May 22nd, 2008, 06:16 AM	#7 (permalink)
D-MAN MINI2 Regular My Classifieds Join Date: Feb 2008 Local Time: 09:55 PM Posts: 97 Offline	I would imagine that there would be quite a few guys in Sydney who would attend a Jan tuning session. If he is seriously considering coming down under I can get numbers for Sydney!

May 22nd, 2008, 07:02 AM	#8 (permalink)
scolburn79 Forever Modding!! My Classifieds Join Date: Aug 2007 Location: Brisbane, Northside Local Time: 08:55 PM Posts: 125 Offline	Yes, please spread the word around. Once I tell him how many people you have got together I might be able to pin him down to a date. He is very busy with his developments and race season commitments but he told me that he is very keen to come over.

May 22nd, 2008, 07:07 AM	#9 (permalink)
Darrin Mighty Mouse Join Date: Feb 2007 Location: Maitland Local Time: 09:55 PM Posts: 98 Online	Quote: Originally Posted by D-MAN (original) I would imagine that there would be quite a few guys in Sydney who would attend a Jan tuning session. If he is seriously considering coming down under I can get numbers for Sydney! You can definitely add me to that list!

May 22nd, 2008, 08:26 AM	#10 (permalink)
scolburn79 Forever Modding!! My Classifieds Join Date: Aug 2007 Location: Brisbane, Northside Local Time: 08:55 PM Posts: 125 Offline	OK, I am going to open up a new thread about this and I will create a list and we will go from there.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)