MINI2

MiniDSW2005 · Oct 8th, 2005, 01:33 AM

Hi all, I would like to recommand the best place to install the Mini Cooper S supercharge pulley in Montreal, which is VW performance.

They have good skills, good price and the owner Jocyln is DA MAN! I am fully satisfied with their service, Highly Recommand!

If anyone need their contract info, here it is their phone number: 450-464-4207.

Happy motoring!!

SoonToBeMini · Jan 3rd, 2006, 02:08 AM

Which pulley did you buy if you don't mind me asking? Was it expensive? I'm planning on buying the M7 16% pulley from coopersport.ca in the next month or so and I'll also give jocelyn a call, ppl speak very highly of him around here.

How do you like your new setup, do you feel the extra hps? No issues so far?

thanks!

mightydread · Jan 14th, 2006, 01:59 PM

Best place to install the pulley in Montreal! is brocks autotech in rigaud . i know its a little out of the way but dudes the guy is amazing. does all my work on my cars been going to him for over ten years.
just my 2 cents
mikie
P.s 3 things you can't live without 1: a good doctor,2: a great banker,3:amazing mechanic.

MiniDSW2005 · Jan 26th, 2006, 05:06 AM

Quote: Originally Posted by SoonToBeMini

Which pulley did you buy if you don't mind me asking? Was it expensive? I'm planning on buying the M7 16% pulley from coopersport.ca in the next month or so and I'll also give jocelyn a call, ppl speak very highly of him around here.

How do you like your new setup, do you feel the extra hps? No issues so far?

thanks!

Hi, sorry for the late reply since I did forget my Mini2 password, lol.

I am using the Helix 17% reduction pulley and so far, the only problem I had was the wrong belt I used at the beginning for the 17% pulley, other than that, no problem at all. And I used to feel frustrate with my MCS 's low end power (especially 1st gear), and now it runs like a rocket.

Plus last summer, my best time 0-60MPH was 5.9sec with pulley, intake, exhaust, plugs and MTH software which I found is amazing!

and as I said, if you need to do pulley swap, no doubt that Joceyln is the best choice in Montreal. And when you see how many crazy cars he owns, you will understand why he is so good.

St00ge · Jan 26th, 2006, 05:33 AM

Quote: Originally Posted by MiniDSW2005

Plus last summer, my best time 0-60MPH was 5.9sec with pulley, intake, exhaust, plugs and MTH software which I found is amazing!

great time!

which zorst and intake? cos those are my mods too...

DarkMiniCooperS · Feb 16th, 2006, 02:44 AM

I just went back to my friendly Formule VW to get my supercharger's belt changed.

As usual, an awesome service and a great price!

Jocelyn is the guy to let work on a MINI, and he sure knows his mechanic stuff...
He installed my 15% pulley 2 years ago. He also installed my short shifter and now, a new belt.

I trust him and he takes care of my car like if it was his own baby!

Formule VW and Jocelyn (garage owner) rocks!

Feel free to contact me for his phone number!

mightydread · Feb 27th, 2006, 12:51 PM

hi all, i think i just found my new garage for doing my mods. last week i stop at bimmershop.ca . so sebastion gave me the grand tour ,dudes theres nothing like seeing 4 track cars in a garage.so i made appointment to change my springs , hopefully this will be the beginning of a happy new marriage

. i will be changing my springs on march 14 so on the 15th i will have a update for you all.

thanx

mikie

SoonToBeMini · Mar 5th, 2006, 11:25 PM

Cool don't forget to post pics of your dropped ride!

While we're at it anyone planning on attending the bimmershop pulley party? I for one will most likely be there I'm waiting for them to answer a question or two before I sign in (I want to change the plugs too for one thing).

mightydread · Mar 15th, 2006, 03:38 PM

hi guys here is my ride lowered , done by PMI/bimmershop.

Click image for larger version

Name: dscn0037.JPG
Views: 72
Size: 120.6 KB
ID: 112275

those are my winter steelies .

MiniDSW2005 · Apr 17th, 2006, 01:04 AM

Hi all:

I did visit Bimmershop more than twice, and it is true that they are the best BMW/Mini Tech in Montreal.

These guys have professinal skills and know everything about Mini and BMW (They install my H Sport sawy bar in only 30 Mins with no problem, imagine..) And they do care customers' cars like their own cars, which is great! They even check everything from my Mini S to make sure it gives maximum performance!

I feel so glad to find this store and thanks a lot Mikie, they are really really good, good service and good price.

Thumbs up to Sebatien and Steven from Bimmershop. You guys are the best techs I found in Montreal.

Cheers
Kent

djafactor · Apr 17th, 2006, 08:41 PM

I'm having my car done at PMI/Bimmershop this coming weekend. Hung out with these guys a few times and can tell they really know their stuff.

Amit

Oct 8th, 2005, 01:33 AM	#1
MiniDSW2005 MINI2 Regular Join Date: Nov 2004 Local Time: 04:47 PM Posts: 81 Offline	Best place to install the pulley in Montreal! Hi all, I would like to recommand the best place to install the Mini Cooper S supercharge pulley in Montreal, which is VW performance. They have good skills, good price and the owner Jocyln is DA MAN! I am fully satisfied with their service, Highly Recommand! If anyone need their contract info, here it is their phone number: 450-464-4207. Happy motoring!!

Jan 14th, 2006, 01:59 PM	#3 (permalink)
mightydread MINI2 Regular Join Date: Jan 2005 Local Time: 04:47 PM Posts: 56 Offline	Best place to install the pulley in Montreal! is brocks autotech in rigaud . i know its a little out of the way but dudes the guy is amazing. does all my work on my cars been going to him for over ten years. just my 2 cents mikie P.s 3 things you can't live without 1: a good doctor,2: a great banker,3:amazing mechanic. 05 DS/B MCS

Feb 16th, 2006, 02:44 AM	#6 (permalink)
DarkMiniCooperS MINI crazy! Join Date: Dec 2003 Location: Miami, FL Local Time: 04:47 PM Posts: 299 Offline	I just went back to my friendly Formule VW to get my supercharger's belt changed. As usual, an awesome service and a great price! Jocelyn is the guy to let work on a MINI, and he sure knows his mechanic stuff... He installed my 15% pulley 2 years ago. He also installed my short shifter and now, a new belt. I trust him and he takes care of my car like if it was his own baby! Formule VW and Jocelyn (garage owner) rocks! Feel free to contact me for his phone number! My MINI Cooper S My boost gauge "how-to" thread

Feb 27th, 2006, 12:51 PM	#7 (permalink)
mightydread MINI2 Regular Join Date: Jan 2005 Local Time: 04:47 PM Posts: 56 Offline	hi all, i think i just found my new garage for doing my mods. last week i stop at bimmershop.ca . so sebastion gave me the grand tour ,dudes theres nothing like seeing 4 track cars in a garage.so i made appointment to change my springs , hopefully this will be the beginning of a happy new marriage . i will be changing my springs on march 14 so on the 15th i will have a update for you all. thanx mikie 05 DS/B MCS

Mar 15th, 2006, 03:38 PM	#9 (permalink)
mightydread MINI2 Regular Join Date: Jan 2005 Local Time: 04:47 PM Posts: 56 Offline	hi guys here is my ride lowered , done by PMI/bimmershop. those are my winter steelies . 05 DS/B MCS

MINI2

Fuel for your MINI obsession

For Canadian social and region specific discussion

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jan 3rd, 2006, 02:08 AM	#2 (permalink)
SoonToBeMini MINI2 Newbie Join Date: Jun 2004 Location: Montreal Local Time: 04:47 PM Posts: 46 Offline	Which pulley did you buy if you don't mind me asking? Was it expensive? I'm planning on buying the M7 16% pulley from coopersport.ca in the next month or so and I'll also give jocelyn a call, ppl speak very highly of him around here. How do you like your new setup, do you feel the extra hps? No issues so far? thanks!

Jan 26th, 2006, 05:06 AM	#4 (permalink)
MiniDSW2005 MINI2 Regular Join Date: Nov 2004 Local Time: 04:47 PM Posts: 81 Offline	Quote: Originally Posted by SoonToBeMini Which pulley did you buy if you don't mind me asking? Was it expensive? I'm planning on buying the M7 16% pulley from coopersport.ca in the next month or so and I'll also give jocelyn a call, ppl speak very highly of him around here. How do you like your new setup, do you feel the extra hps? No issues so far? thanks! Hi, sorry for the late reply since I did forget my Mini2 password, lol. I am using the Helix 17% reduction pulley and so far, the only problem I had was the wrong belt I used at the beginning for the 17% pulley, other than that, no problem at all. And I used to feel frustrate with my MCS 's low end power (especially 1st gear), and now it runs like a rocket. Plus last summer, my best time 0-60MPH was 5.9sec with pulley, intake, exhaust, plugs and MTH software which I found is amazing! and as I said, if you need to do pulley swap, no doubt that Joceyln is the best choice in Montreal. And when you see how many crazy cars he owns, you will understand why he is so good.

Jan 26th, 2006, 05:33 AM	#5 (permalink)
St00ge 8/10 on the Stoogometer Join Date: Aug 2005 Location: Melbourne Local Time: 06:47 AM Posts: 2,835 Offline	Quote: Originally Posted by MiniDSW2005 Plus last summer, my best time 0-60MPH was 5.9sec with pulley, intake, exhaust, plugs and MTH software which I found is amazing! great time! which zorst and intake? cos those are my mods too...

Mar 5th, 2006, 11:25 PM	#8 (permalink)
SoonToBeMini MINI2 Newbie Join Date: Jun 2004 Location: Montreal Local Time: 04:47 PM Posts: 46 Offline	Cool don't forget to post pics of your dropped ride! While we're at it anyone planning on attending the bimmershop pulley party? I for one will most likely be there I'm waiting for them to answer a question or two before I sign in (I want to change the plugs too for one thing).

Apr 17th, 2006, 01:04 AM	#10 (permalink)
MiniDSW2005 MINI2 Regular Join Date: Nov 2004 Local Time: 04:47 PM Posts: 81 Offline	Hi all: I did visit Bimmershop more than twice, and it is true that they are the best BMW/Mini Tech in Montreal. These guys have professinal skills and know everything about Mini and BMW (They install my H Sport sawy bar in only 30 Mins with no problem, imagine..) And they do care customers' cars like their own cars, which is great! They even check everything from my Mini S to make sure it gives maximum performance! I feel so glad to find this store and thanks a lot Mikie, they are really really good, good service and good price. Thumbs up to Sebatien and Steven from Bimmershop. You guys are the best techs I found in Montreal. Cheers Kent

Apr 17th, 2006, 08:41 PM	#11 (permalink)
djafactor MINI2 Regular Join Date: Jul 2002 Location: Montreal, Quebec Local Time: 04:47 PM Posts: 162 Offline	I'm having my car done at PMI/Bimmershop this coming weekend. Hung out with these guys a few times and can tell they really know their stuff. Amit '05 MCS '78 MINI 1000 electricpixel.org

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where do you buy and install winter tire in Montreal	caah	Canada	11	Dec 8th, 2006 07:32 PM
Cheapest Place in Sydney for Pulley install	wrecky	Australia	77	Sep 12th, 2006 04:26 AM
Recommendations for a place to install lights	Wannabee	Australia	9	Feb 14th, 2006 12:35 PM
Any good place to do the Alta Pulley installation in Toronto? Or Montreal?	MiniDSW2005	Canada	20	Dec 16th, 2004 01:54 AM
Possible Pully install in Montreal/Toronto/Vermont/NY/NJ by Randy?	djafactor	Engine & Drivetrain Tuning	4	Jul 20th, 2003 12:10 AM