MINI2

thespankyone · Oct 2nd, 2005, 07:05 PM

I just bought a used 2003 MCS. Is there an easy way to know if I have the small SC pully added already? If not, that's my first upgrade...thanks in advance..

matt

thespankyone · Oct 2nd, 2005, 10:21 PM

here are some pics. The 1st one is the "area" were I think the pulley is...The second is what I believe to be the pulley, and it says ALTA. on it... Anyone know if this is an upgraded pulley?
[IMG]pully1.jpg[/IMG]
[IMG]pully2.jpg[/IMG]

thanks!

thespankyone · Oct 3rd, 2005, 01:49 AM

so, there must be a mathmatical formula to find out the % of the pulley. Does anyone know how to tell the difference? Maybe by measuring the origional vs. upgraded...

MINIAC · Oct 3rd, 2005, 02:27 AM

2.58" = Stock
2.21" = JCW
2.19" = 15%
2.14" = 17%
2.07" = 19%

Hartge · Oct 5th, 2005, 05:38 PM

I think the best way is to ask the previous owner....

Hartge · Oct 5th, 2005, 10:25 PM

Oppps....In that case, one has to do the manual way, to measure it.

Oct 2nd, 2005, 07:05 PM	#1
thespankyone MINI2 Newbie Join Date: Oct 2005 Local Time: 09:23 PM Posts: 10 Offline	How do I know if I have small SC pully I just bought a used 2003 MCS. Is there an easy way to know if I have the small SC pully added already? If not, that's my first upgrade...thanks in advance.. matt

Oct 2nd, 2005, 10:21 PM	#2 (permalink)
thespankyone MINI2 Newbie Join Date: Oct 2005 Local Time: 09:23 PM Posts: 10 Offline	here are some pics. The 1st one is the "area" were I think the pulley is...The second is what I believe to be the pulley, and it says ALTA. on it... Anyone know if this is an upgraded pulley? [IMG]pully1.jpg[/IMG] [IMG]pully2.jpg[/IMG] thanks! Attached Thumbnails

Oct 3rd, 2005, 02:27 AM	#4 (permalink)
MINIAC MINI Profiler Join Date: Feb 2001 Location: City By The Bay Local Time: 01:23 PM Posts: 8,618 Online	Measure the diameter ... 2.58" = Stock 2.21" = JCW 2.19" = 15% 2.14" = 17% 2.07" = 19%

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15% pully	addz	Engine & Drivetrain Tuning	6	Jul 9th, 2007 09:41 PM
Pully Fitting	jas72	MINI Cooper S	3	Oct 21st, 2006 11:41 PM
Pully and A/C?	DarkMiniCooperS	Engine & Drivetrain Tuning	2	May 1st, 2004 09:38 PM
pessimism on pully?	PhillyNeil	Engine & Drivetrain Tuning	13	Jun 20th, 2003 01:56 AM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Oct 3rd, 2005, 01:49 AM	#3 (permalink)
thespankyone MINI2 Newbie Join Date: Oct 2005 Local Time: 09:23 PM Posts: 10 Offline	so, there must be a mathmatical formula to find out the % of the pulley. Does anyone know how to tell the difference? Maybe by measuring the origional vs. upgraded...

Oct 5th, 2005, 05:38 PM	#5 (permalink)
Hartge SuperSoniC Join Date: Oct 2003 Location: Malaysia Local Time: 05:23 AM Posts: 275 Offline	I think the best way is to ask the previous owner....

Oct 5th, 2005, 10:25 PM	#6 (permalink)
Hartge SuperSoniC Join Date: Oct 2003 Location: Malaysia Local Time: 05:23 AM Posts: 275 Offline	Oppps....In that case, one has to do the manual way, to measure it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)