MINI2

Il Generale · Jan 19th, 2006, 08:21 PM

Hello , how many horses power I can reach with a 15% pulley ,panel filter and a mth tuner file..? Something dyno result..?

Thank you

minigolf · Jan 19th, 2006, 10:16 PM

The result will differ from car to car. But I would expect you'd get anywhere from 20-35 hp at the wheels with those mods … maybe more???

You'll probably get a better result by going for a full CAI, such as ALTA or similar, than a simple panel filter replacement too.

Il Generale · Jan 20th, 2006, 07:02 PM

Mth said about 225bhp ....It is real..?

minigolf · Jan 21st, 2006, 03:14 AM

I don't think so, but let me put it to you this way … Well, I think you'll be happy with the improvement if you fit a 15% pulley with an MTH ECU remap … but I'd be surprised if it reached 225bhp.

St00ge · Jan 21st, 2006, 03:21 AM

Can anyone take a stab at the power i'd get with these mods?

Alta CAI
MTH tuner
17% pulley
One-ball exhaust

minigolf · Jan 21st, 2006, 04:04 AM

Enough.

St00ge · Jan 21st, 2006, 04:14 AM

Quote: Originally Posted by minigolf

Enough.

haha, alright alright. But that said, although you make more boost with a 17% pulley, randy webb claims that he made more power with a 15% pulley....due to higher temps made by the sc with a 17%

XTREEM · Jan 21st, 2006, 09:21 AM

Quote: Originally Posted by Il Generale

Mth said about 225bhp ....It is real..?

No it is not possible

St00ge · Jan 21st, 2006, 01:48 PM

Quote: Originally Posted by XTREEM

No it is not possible

maybe with a CAI and exhaust, if u've got a good MCS

XTREEM · Jan 21st, 2006, 10:40 PM

Quote: Originally Posted by etalj

maybe with a CAI and exhaust, if u've got a good MCS

That is not what he asked though.

St00ge · Jan 21st, 2006, 11:04 PM

yeh i know, but they're relatively cheap ways to liberate a few horses...just trying to encourage him...the only reason they say 225bhp is cos they quote 200+ bhp with the tuner file, and a pulley will roughly give you 20-25 bhp,

Quote: Originally Posted by XTREEM

That is not what he asked though.

XTREEM · Jan 22nd, 2006, 06:46 AM

I dont care how they justify it. Its just wrong and mis leading.

Dont get me wrong i like and use MTH but the figures they quote are not realistic. This can be said for most tuning companys.

Quoting engine horsepower and not wheel horepower is also a crook.

St00ge · Jan 22nd, 2006, 08:18 AM

Quote: Originally Posted by XTREEM

Quoting engine horsepower and not wheel horepower is also a crook.

this is how they protect their claim. They can blame incorrect/inaccurate conversion from whp to bhp.

I wasn't saying how they justify it, i was saying how they arrive at it. First off the 200bhp they quote with just the file is rubbish. More like 180bhp or so, plus the pulley, looking at 200 or so.

Jan 19th, 2006, 08:21 PM	#1
Il Generale MINI2 Newbie Join Date: Oct 2005 Local Time: 10:33 PM Posts: 12 Offline	15% pulley + mth tuner ..how many hp...??? Hello , how many horses power I can reach with a 15% pulley ,panel filter and a mth tuner file..? Something dyno result..? Thank you

Jan 19th, 2006, 10:16 PM	#2 (permalink)
minigolf Blue is the colour! Join Date: Jul 2003 Location: Canberra, Australia Local Time: 08:33 AM Posts: 13,849 Offline	The result will differ from car to car. But I would expect you'd get anywhere from 20-35 hp at the wheels with those mods … maybe more??? You'll probably get a better result by going for a full CAI, such as ALTA or similar, than a simple panel filter replacement too. Sabine Schmitz: Fear disturbs your concentration.

Jan 21st, 2006, 03:14 AM	#4 (permalink)
minigolf Blue is the colour! Join Date: Jul 2003 Location: Canberra, Australia Local Time: 08:33 AM Posts: 13,849 Offline	I don't think so, but let me put it to you this way … Well, I think you'll be happy with the improvement if you fit a 15% pulley with an MTH ECU remap … but I'd be surprised if it reached 225bhp. Sabine Schmitz: Fear disturbs your concentration.

Jan 21st, 2006, 04:04 AM	#6 (permalink)
minigolf Blue is the colour! Join Date: Jul 2003 Location: Canberra, Australia Local Time: 08:33 AM Posts: 13,849 Offline	Enough. Sabine Schmitz: Fear disturbs your concentration.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jan 20th, 2006, 07:02 PM	#3 (permalink)
Il Generale MINI2 Newbie Join Date: Oct 2005 Local Time: 10:33 PM Posts: 12 Offline	Mth said about 225bhp ....It is real..?

Jan 21st, 2006, 03:21 AM	#5 (permalink)
St00ge 8/10 on the Stoogometer Join Date: Aug 2005 Location: Melbourne Local Time: 07:33 AM Posts: 2,835 Offline	Can anyone take a stab at the power i'd get with these mods? Alta CAI MTH tuner 17% pulley One-ball exhaust

Jan 21st, 2006, 04:14 AM	#7 (permalink)
St00ge 8/10 on the Stoogometer Join Date: Aug 2005 Location: Melbourne Local Time: 07:33 AM Posts: 2,835 Offline	Quote: Originally Posted by minigolf Enough. haha, alright alright. But that said, although you make more boost with a 17% pulley, randy webb claims that he made more power with a 15% pulley....due to higher temps made by the sc with a 17%

Jan 21st, 2006, 09:21 AM	#8 (permalink)
XTREEM MINI2 Master Join Date: Oct 2004 Location: Batemans Bay Local Time: 08:33 AM Posts: 836 Offline	Quote: Originally Posted by Il Generale Mth said about 225bhp ....It is real..? No it is not possible

Jan 21st, 2006, 01:48 PM	#9 (permalink)
St00ge 8/10 on the Stoogometer Join Date: Aug 2005 Location: Melbourne Local Time: 07:33 AM Posts: 2,835 Offline	Quote: Originally Posted by XTREEM No it is not possible maybe with a CAI and exhaust, if u've got a good MCS

Jan 21st, 2006, 10:40 PM	#10 (permalink)
XTREEM MINI2 Master Join Date: Oct 2004 Location: Batemans Bay Local Time: 08:33 AM Posts: 836 Offline	Quote: Originally Posted by etalj maybe with a CAI and exhaust, if u've got a good MCS That is not what he asked though.

Jan 21st, 2006, 11:04 PM	#11 (permalink)
St00ge 8/10 on the Stoogometer Join Date: Aug 2005 Location: Melbourne Local Time: 07:33 AM Posts: 2,835 Offline	yeh i know, but they're relatively cheap ways to liberate a few horses...just trying to encourage him...the only reason they say 225bhp is cos they quote 200+ bhp with the tuner file, and a pulley will roughly give you 20-25 bhp, Quote: Originally Posted by XTREEM That is not what he asked though.

Jan 22nd, 2006, 06:46 AM	#12 (permalink)
XTREEM MINI2 Master Join Date: Oct 2004 Location: Batemans Bay Local Time: 08:33 AM Posts: 836 Offline	I dont care how they justify it. Its just wrong and mis leading. Dont get me wrong i like and use MTH but the figures they quote are not realistic. This can be said for most tuning companys. Quoting engine horsepower and not wheel horepower is also a crook.

Jan 22nd, 2006, 08:18 AM	#13 (permalink)
St00ge 8/10 on the Stoogometer Join Date: Aug 2005 Location: Melbourne Local Time: 07:33 AM Posts: 2,835 Offline	Quote: Originally Posted by XTREEM Quoting engine horsepower and not wheel horepower is also a crook. this is how they protect their claim. They can blame incorrect/inaccurate conversion from whp to bhp. I wasn't saying how they justify it, i was saying how they arrive at it. First off the 200bhp they quote with just the file is rubbish. More like 180bhp or so, plus the pulley, looking at 200 or so.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MTH Tuner Remap	MarkW19	Engine & Drivetrain Tuning	21	Nov 28th, 2006 08:53 PM
Anyone in SE with a MTH tuner cable?	aslan0r	Engine & Drivetrain Tuning	3	Apr 10th, 2006 08:54 PM
Got MTH Tuner fitted to my ONE	MiniMpi	Engine & Drivetrain Tuning	1	Mar 19th, 2006 11:31 PM
MTH Tuner remap	MarkW19	Engine & Drivetrain Tuning	11	Feb 9th, 2006 09:18 AM
Need help with MTH-tuner	piston	Engine & Drivetrain Tuning	4	Sep 26th, 2005 06:46 PM