MINI2

wilmanlee · Apr 25th, 2006, 06:59 PM

Finally booked my S in at AMD to have the Milltek Cat Back System fitted.

Heard some ppl have probs with rattles and burning away the aero rear bumper.

I myself have a rear aero bumper and would like to some advice on what to look for in a good fitment.

Thanks!

Wilman

cooper7 · Apr 25th, 2006, 07:33 PM

Yeah i have got to get mine refitted due to it hitting the centre plate as its moved out of allignment. Check that it's nowhere near the centre plate when it is fitted. Also some hav had different plastic/rubber fittings used which attach the exhaust on to the hangers. My mechanic bangged a number of extra washers on to ensure it didn't burn the aero kit on my car.

If you can ask to have a look at the car when it is still up on the ramp to have a decent check yourself. Having said that AMD fitted my Milltek on my old Cooper and i found the service to be superb.

Enjoy it when you get it fitted as it will sound great!!

wilmanlee · Apr 25th, 2006, 07:44 PM

Is the Centre Plate the one under the battery? How did u manage to move it out of allignment?

Once fitted, how does it burn away the areo kit if fitted incorrectly? I would like to know what to look for just incase i dont get a chance to look at the car when up on the ramp.

Apr 25th, 2006, 06:59 PM	#1
wilmanlee Newbie Adventure Join Date: Jan 2006 Location: Woking Local Time: 10:33 PM Posts: 61 Offline	Milltek Exhaust Fitting Finally booked my S in at AMD to have the Milltek Cat Back System fitted. Heard some ppl have probs with rattles and burning away the aero rear bumper. I myself have a rear aero bumper and would like to some advice on what to look for in a good fitment. Thanks! Wilman

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Retro fitting JCW exhaust tips to MCS Exhaust	Cooooooperslad	Exterior	13	Jul 3rd, 2007 02:33 PM
Milltek Exhaust Fitting (gaskets etc)	futureal33	Engine & Drivetrain Tuning	4	Jan 24th, 2007 06:59 PM
Milltek exhaust fitting	pubert	Engine & Drivetrain Tuning	4	Jul 21st, 2006 06:52 PM
AMD Fitting my Milltek	wilmanlee	Engine & Drivetrain Tuning	13	May 6th, 2006 09:18 PM
Fitting a Milltek Exhaust	Richard M	Engine & Drivetrain Tuning	1	Apr 8th, 2005 01:18 PM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Apr 25th, 2006, 07:33 PM	#2 (permalink)
cooper7 MINI2 Senior Join Date: Nov 2002 Location: Leicester Local Time: 10:33 PM Posts: 507 Offline	Yeah i have got to get mine refitted due to it hitting the centre plate as its moved out of allignment. Check that it's nowhere near the centre plate when it is fitted. Also some hav had different plastic/rubber fittings used which attach the exhaust on to the hangers. My mechanic bangged a number of extra washers on to ensure it didn't burn the aero kit on my car. If you can ask to have a look at the car when it is still up on the ramp to have a decent check yourself. Having said that AMD fitted my Milltek on my old Cooper and i found the service to be superb. Enjoy it when you get it fitted as it will sound great!!

Apr 25th, 2006, 07:44 PM	#3 (permalink)
wilmanlee Newbie Adventure Join Date: Jan 2006 Location: Woking Local Time: 10:33 PM Posts: 61 Offline	Is the Centre Plate the one under the battery? How did u manage to move it out of allignment? Once fitted, how does it burn away the areo kit if fitted incorrectly? I would like to know what to look for just incase i dont get a chance to look at the car when up on the ramp.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)