MINI2

Eds · Jul 10th, 2006, 05:00 AM

Has anyone installed a boost gauge ? How did you do it?
Thanks.

Eds

Mods: Alta 15% pulley, NGK Iridium, 93 Octane Shark ECU remap, Ultrik CAI, H&R 19 mm Rear Sway bar.

minti · Jul 10th, 2006, 01:20 PM

try this:

http://www.minimania.com/pdfile/NMI7625_INSTR.zip

if you are not using OEM gauges but using them from other vendors, it is the same procedure.

Baker · Jul 10th, 2006, 03:23 PM

You can also go for the more integrated look by installing the gauge in one of your vents like I have:

CoolCarStuff · Jul 21st, 2006, 01:28 PM

Hi - car to share the model and diameter of the gauge in your vent?

DJ

venox22 · Jul 21st, 2006, 01:40 PM

Does your 2-spoke wheel have MFSW controls???

my 2-spoke MFSW's leather is peeling so looking for another wheel!!!

Quote: Originally Posted by minti

try this:

http://www.minimania.com/pdfile/NMI7625_INSTR.zip

if you are not using OEM gauges but using them from other vendors, it is the same procedure.

Baker · Jul 21st, 2006, 04:13 PM

Quote: Originally Posted by DJBlack

Hi - car to share the model and diameter of the gauge in your vent?

DJ

Its a Speco gauge, and from memory its the 58mm size.

CoolCarStuff · Jul 22nd, 2006, 10:11 PM

Thanks... that looks a very neat install!

Did you need any special T piece to fit it, or was it a normal straight through jobbie?

DJ

Jul 10th, 2006, 05:00 AM	#1
Eds MINI2 Newbie Join Date: Jul 2004 Location: Canada Local Time: 03:42 PM Posts: 46 Offline	Boost Gauge Installation Has anyone installed a boost gauge ? How did you do it? Thanks. Eds Mods: Alta 15% pulley, NGK Iridium, 93 Octane Shark ECU remap, Ultrik CAI, H&R 19 mm Rear Sway bar.

Jul 10th, 2006, 01:20 PM	#2 (permalink)
minti MINI2 Newbie Join Date: Mar 2006 Local Time: 11:42 PM Posts: 28 Offline	try this: http://www.minimania.com/pdfile/NMI7625_INSTR.zip if you are not using OEM gauges but using them from other vendors, it is the same procedure. Attached Thumbnails MCS JCW MTH GTT Alta H&R Bilstein

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Factory gauge pod installation - need help	sheaa	Interior & Ice	3	May 14th, 2004 02:35 PM
Gauge Installation	cwwhk	Rest of the World	10	Apr 10th, 2004 10:32 PM
Boost Gauge	Phil 1	Interior & Ice	3	Jul 8th, 2003 01:26 PM
boost gauge?	presurized mini	Engine & Drivetrain Tuning	2	Oct 5th, 2002 12:50 AM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jul 10th, 2006, 03:23 PM	#3 (permalink)
Baker Being normal is not fun! Join Date: Jul 2004 Location: Newcastle, Australia Local Time: 07:42 AM Posts: 4,115 Offline	You can also go for the more integrated look by installing the gauge in one of your vents like I have:

Jul 21st, 2006, 01:28 PM	#4 (permalink)
CoolCarStuff Flying Scotsman My Classifieds Join Date: Jun 2006 Location: Sunny Scotland Local Time: 09:42 PM Posts: 238 Offline	Hi - car to share the model and diameter of the gauge in your vent? DJ

Jul 21st, 2006, 01:40 PM	#5 (permalink)
venox22 only the brave! Join Date: Dec 2004 Location: Lincs Local Time: 10:42 PM Posts: 1,290 Offline	Does your 2-spoke wheel have MFSW controls??? my 2-spoke MFSW's leather is peeling so looking for another wheel!!! Quote: Originally Posted by minti try this: http://www.minimania.com/pdfile/NMI7625_INSTR.zip if you are not using OEM gauges but using them from other vendors, it is the same procedure.

Jul 21st, 2006, 04:13 PM	#6 (permalink)
Baker Being normal is not fun! Join Date: Jul 2004 Location: Newcastle, Australia Local Time: 07:42 AM Posts: 4,115 Offline	Quote: Originally Posted by DJBlack Hi - car to share the model and diameter of the gauge in your vent? DJ Its a Speco gauge, and from memory its the 58mm size.

Jul 22nd, 2006, 10:11 PM	#7 (permalink)
CoolCarStuff Flying Scotsman My Classifieds Join Date: Jun 2006 Location: Sunny Scotland Local Time: 09:42 PM Posts: 238 Offline	Thanks... that looks a very neat install! Did you need any special T piece to fit it, or was it a normal straight through jobbie? DJ

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)