MINI2

roland2003 · Dec 9th, 2006, 01:11 PM

Hi Peter, yes in stock.
Best Regards Roland GTT

MiniFr34k · Dec 10th, 2006, 10:29 PM

just some feedback.. ive fitted the 0% crank.. (im running 15% sc pulley)... idles alot nicer.. less wobble/bog going into 1st.. then from 1st to second.. car pulls a touch better but the difference isnt huge like it was when fitting the 15% pulley..

Fisher · Dec 11th, 2006, 10:42 PM

Do you need any special tool to change the crank pulley?

Bye

roland2003 · Dec 12th, 2006, 11:33 AM

You need a puller to get the stock one off, but no special tools to fit the GTT one back on.
Best Regards Roland GTT

Fisher · Dec 12th, 2006, 09:32 PM

It is special puller or I can do that with standard two or three handle puller?

Fisher · Dec 20th, 2006, 09:45 AM

It is that enough or I need a special one?

bye

supercoopers · Dec 20th, 2006, 11:48 AM

Quote: Originally Posted by Fisher (original)

It is that enough or I need a special one?

bye

That won't do it I'm afraid. You'll end up damaging the pulley and possibly the nose of the crank which is very pricey to put right! Having struggled with this myself, I would get someone with the OEM tool or equivalent to do this for you, otherwise you are in for a World of frustration and pain!

Henry

icebergst · Feb 28th, 2007, 01:46 PM

Hi all I just ordered Alta 15% reduced sc pulley...
But I don't know about crank pulley :/ . (I don't want to push hard the car)
Any advices ?? which crank pulley ?

Thanxx

Dec 9th, 2006, 01:11 PM	#21
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 09:50 PM Posts: 2,731 Offline	Hi Peter, yes in stock. Best Regards Roland GTT www.gttuning.com

Dec 12th, 2006, 11:33 AM	#24 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 09:50 PM Posts: 2,731 Offline	You need a puller to get the stock one off, but no special tools to fit the GTT one back on. Best Regards Roland GTT www.gttuning.com

Feb 28th, 2007, 01:46 PM	#28 (permalink)
icebergst Platinium Member Join Date: May 2005 Location: Istanbul Local Time: 10:50 PM Posts: 2 Offline	Hi all I just ordered Alta 15% reduced sc pulley... But I don't know about crank pulley :/ . (I don't want to push hard the car) Any advices ?? which crank pulley ? Thanxx [size="4"]let's mini ...[/SIZE] Last edited by icebergst : Feb 28th, 2007 at 06:26 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lightened crank pulley	RCMini	Engine & Drivetrain Tuning	3	Sep 14th, 2007 06:12 AM
19% + 3% crank pulley	james l	Engine & Drivetrain Tuning	31	May 24th, 2007 05:58 PM
05 Crank pulley different to O3?	Drewski	Engine & Drivetrain Tuning	3	Sep 10th, 2006 09:32 PM
What would a 3% oversized (lightweight)oversized crank pulley do for factory boost?	05MCSConvertible	Engine & Drivetrain Tuning	5	Jul 28th, 2005 08:59 PM
Lightened crank pulley	suprchrgdmini	Engine & Drivetrain Tuning	10	May 9th, 2003 11:47 AM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Dec 10th, 2006, 10:29 PM	#22 (permalink)
MiniFr34k fr34king n00b! My Classifieds Join Date: Dec 2004 Location: Sydney Local Time: 07:50 AM Posts: 2,173 Offline	just some feedback.. ive fitted the 0% crank.. (im running 15% sc pulley)... idles alot nicer.. less wobble/bog going into 1st.. then from 1st to second.. car pulls a touch better but the difference isnt huge like it was when fitting the 15% pulley..

Dec 11th, 2006, 10:42 PM	#23 (permalink)
Fisher MINI2 Regular Join Date: Dec 2004 Local Time: 10:50 PM Posts: 256 Offline	Do you need any special tool to change the crank pulley? Bye

Dec 12th, 2006, 09:32 PM	#25 (permalink)
Fisher MINI2 Regular Join Date: Dec 2004 Local Time: 10:50 PM Posts: 256 Offline	It is special puller or I can do that with standard two or three handle puller?

Dec 20th, 2006, 09:45 AM	#26 (permalink)
Fisher MINI2 Regular Join Date: Dec 2004 Local Time: 10:50 PM Posts: 256 Offline	It is that enough or I need a special one? bye

Dec 20th, 2006, 11:48 AM	#27 (permalink)
supercoopers MINI2 Senior My Classifieds Join Date: May 2003 Local Time: 09:50 PM Posts: 537 Offline	Quote: Originally Posted by Fisher (original) It is that enough or I need a special one? bye That won't do it I'm afraid. You'll end up damaging the pulley and possibly the nose of the crank which is very pricey to put right! Having struggled with this myself, I would get someone with the OEM tool or equivalent to do this for you, otherwise you are in for a World of frustration and pain! Henry

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)