MINI2

ignote · Feb 7th, 2007, 01:22 PM

Does anyone know if a Milltek exhaust for a Cabrio S will fit a regular Cooper S?
Does anyone know what is different between the two exhausts?

Thanks

Rakey · Feb 7th, 2007, 01:35 PM

depends on the age of the tintop S, the hangers did change direction on the MCS when the chassis was updated in preparation for the MCSC, but other than that yes it would fit, even with the direction change I'm sure it could be modified to fit if need be

Japper · Feb 7th, 2007, 01:43 PM

Quote: Originally Posted by ignote (original)

Does anyone know if a Milltek exhaust for a Cabrio S will fit a regular Cooper S?
Does anyone know what is different between the two exhausts?

Thanks

If it's anything like the std exhaust it will have a flattened section of pipe ( before rear silencers ) to clear the strengthening brace fitted to cabrio's. If this is correct it will fit a hardtop, though the restriction may reduce performance slightly.

ignote · Feb 7th, 2007, 01:45 PM

Quote: Originally Posted by ignote (original)

Does anyone know if a Milltek exhaust for a Cabrio S will fit a regular Cooper S?
Does anyone know what is different between the two exhausts?

Thanks

Forgot to mention that they are both 2005 MINIs.

Anyone have any pics of the Cabrio S Milltek pipes?

Rakey · Feb 7th, 2007, 06:31 PM

if both are 2005 then it will fit then

the miltek pipes do not vary between tintop and convertible, so have a look at the exhaust you are buying to see the pipes

Feb 7th, 2007, 01:22 PM	#1
ignote MINI2 Newbie Join Date: Jul 2005 Location: Maryland Local Time: 04:54 PM Posts: 34 Offline	Cabrio S Milltek Question Does anyone know if a Milltek exhaust for a Cabrio S will fit a regular Cooper S? Does anyone know what is different between the two exhausts? Thanks

Feb 7th, 2007, 01:35 PM	#2 (permalink)
Rakey Remember My Classifieds Join Date: Apr 2003 Location: Oxfordshire Local Time: 09:54 PM Posts: 50,029 Offline	depends on the age of the tintop S, the hangers did change direction on the MCS when the chassis was updated in preparation for the MCSC, but other than that yes it would fit, even with the direction change I'm sure it could be modified to fit if need be The only problem I have is knowing which one to drive?

Feb 7th, 2007, 01:43 PM	#3 (permalink)
Japper MINI2 Master My Classifieds Join Date: Jul 2006 Location: Oil Country Local Time: 09:54 PM Posts: 1,041 Offline	Quote: Originally Posted by ignote (original) Does anyone know if a Milltek exhaust for a Cabrio S will fit a regular Cooper S? Does anyone know what is different between the two exhausts? Thanks If it's anything like the std exhaust it will have a flattened section of pipe ( before rear silencers ) to clear the strengthening brace fitted to cabrio's. If this is correct it will fit a hardtop, though the restriction may reduce performance slightly. 06 HB/W MCS Chilli

Feb 7th, 2007, 06:31 PM	#5 (permalink)
Rakey Remember My Classifieds Join Date: Apr 2003 Location: Oxfordshire Local Time: 09:54 PM Posts: 50,029 Offline	if both are 2005 then it will fit then the miltek pipes do not vary between tintop and convertible, so have a look at the exhaust you are buying to see the pipes The only problem I have is knowing which one to drive?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Feb 7th, 2007, 01:45 PM	#4 (permalink)
ignote MINI2 Newbie Join Date: Jul 2005 Location: Maryland Local Time: 04:54 PM Posts: 34 Offline	Quote: Originally Posted by ignote (original) Does anyone know if a Milltek exhaust for a Cabrio S will fit a regular Cooper S? Does anyone know what is different between the two exhausts? Thanks Forgot to mention that they are both 2005 MINIs. Anyone have any pics of the Cabrio S Milltek pipes?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Milltek Fitted, quick question?	Cooooooperslad	Engine & Drivetrain Tuning	20	Aug 14th, 2007 12:23 AM
i know, i know another milltek question....	kimoss	Engine & Drivetrain Tuning	10	Aug 13th, 2006 11:21 PM
Milltek question...	MiniLover247	Engine & Drivetrain Tuning	14	Jul 30th, 2006 06:16 AM
Problems mounting Milltek exhaust on a MCS Cabrio	petervankessel	Engine & Drivetrain Tuning	3	Aug 24th, 2005 02:11 PM
Question for Milltek owners...	Darren S	Engine & Drivetrain Tuning	4	Oct 8th, 2003 02:05 PM