MINI2

philly c · Apr 8th, 2007, 06:30 PM

Hi there i am half way through fitting my milteck to my manifold to complete the system.

However i am finding that the section in the midle isnt fitting to well as it is resting on the plate which houses the two rubber hangers and the hangers are not really doing a great deal of good. Have i got the center silencer upside down as it doesnt appear to meet up to well with the rest of the system???I take it s the serial number plate is on the top so not visable when fitted as it faces the under side of the car and does not face the floor?

Any pics to help ??

Many Thanks as always

Phil

cristo · Apr 8th, 2007, 07:13 PM

My serial # plate is on the bottom, and the hangers are nearer to the bottom of the pipe.
Sounds like you have it upside down.

philly c · Apr 8th, 2007, 07:37 PM

i think i have it upside down too was just wanting to no what everyone else has done
thought it was a little odd

Apr 8th, 2007, 06:30 PM	#1
philly c MINI2 Regular My Classifieds Join Date: Jun 2006 Location: Darlington Local Time: 09:54 PM Posts: 176 Online	all who have done DIY miltek Hi there i am half way through fitting my milteck to my manifold to complete the system. However i am finding that the section in the midle isnt fitting to well as it is resting on the plate which houses the two rubber hangers and the hangers are not really doing a great deal of good. Have i got the center silencer upside down as it doesnt appear to meet up to well with the rest of the system???I take it s the serial number plate is on the top so not visable when fitted as it faces the under side of the car and does not face the floor? Any pics to help ?? Many Thanks as always Phil

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Miltek exhaust......	kipper	MINI Cooper S	23	Jun 14th, 2006 10:14 PM
Any one buying Miltek exhaust from amd beware ( ANOTHER MILTEK LOOSING BOLTS ISSUE)	Black&WhiteScooper	Faults & Fixes	35	Mar 26th, 2005 12:38 PM
Miltek Cooper?	robfenn	MINI Cooper	2	Jan 1st, 2005 07:24 PM
US Miltek Prices	macncheese	Engine & Drivetrain Tuning	7	Apr 2nd, 2003 10:25 AM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Apr 8th, 2007, 07:13 PM	#2 (permalink)
cristo BLIKSEM (my brg/brg mc) Join Date: Mar 2003 Location: york, pennsylvania Local Time: 04:54 PM Posts: 2,213 Offline	My serial # plate is on the bottom, and the hangers are nearer to the bottom of the pipe. Sounds like you have it upside down.

Apr 8th, 2007, 07:37 PM	#3 (permalink)
philly c MINI2 Regular My Classifieds Join Date: Jun 2006 Location: Darlington Local Time: 09:54 PM Posts: 176 Online	i think i have it upside down too was just wanting to no what everyone else has done thought it was a little odd

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)