MINI2

jame5_b · May 21st, 2007, 11:36 AM

hi i need to order two new hangers but there are 2 different types. before after the facelift. does anyone no the part number for the hanger that the outside hanger in facing the front of the car and the other side is turned 90 degrees and faces the center of the car.

i was loking on realoem but doesnt tell you which is which

RealOEM.COM * BMW R53 Cooper S EXHAUST SYSTEM, REAR

:: Jon :: · May 21st, 2007, 11:56 AM

the one which is straight with one 90degree bend is pre facelift well its before Jan 2004

jame5_b · May 21st, 2007, 12:03 PM

so would the part number be 18201490022 and 18201490023 for the hangers with the straight and the 90 degree bend

:: Jon :: · May 21st, 2007, 12:20 PM

if yours was built before jan 2004 then yes

jame5_b · May 21st, 2007, 12:38 PM

ok thanks

May 21st, 2007, 11:36 AM	#1
jame5_b MINI2 Newbie Join Date: Oct 2006 Local Time: 11:01 PM Posts: 18 Offline	s exhaust hangers hi i need to order two new hangers but there are 2 different types. before after the facelift. does anyone no the part number for the hanger that the outside hanger in facing the front of the car and the other side is turned 90 degrees and faces the center of the car. i was loking on realoem but doesnt tell you which is which RealOEM.COM * BMW R53 Cooper S EXHAUST SYSTEM, REAR

May 21st, 2007, 11:56 AM	#2 (permalink)
:: Jon :: . My Classifieds Join Date: Apr 2003 Local Time: 11:01 PM Posts: 14,900 Offline	the one which is straight with one 90degree bend is pre facelift well its before Jan 2004 EMPTY SPACE NEEDS FILLING.... but it has to be something that wont get me banned

May 21st, 2007, 12:20 PM	#4 (permalink)
:: Jon :: . My Classifieds Join Date: Apr 2003 Local Time: 11:01 PM Posts: 14,900 Offline	if yours was built before jan 2004 then yes EMPTY SPACE NEEDS FILLING.... but it has to be something that wont get me banned

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust Hangers rusting	:: Jon ::	Faults & Fixes	10	Aug 14th, 2007 06:11 AM
MCS exhaust hangers	rhardaker	Engine & Drivetrain Tuning	2	Mar 31st, 2006 08:23 AM
MILLTEK exhaust hangers	KINGHORN	Engine & Drivetrain Tuning	4	Jan 6th, 2006 03:42 PM
Difference between 04-05 exhaust hangers?	Kotz	Engine & Drivetrain Tuning	6	Nov 7th, 2004 04:49 PM
Exhaust Hangers	Loui	Engine & Drivetrain Tuning	5	Jan 6th, 2003 07:26 PM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

May 21st, 2007, 12:03 PM	#3 (permalink)
jame5_b MINI2 Newbie Join Date: Oct 2006 Local Time: 11:01 PM Posts: 18 Offline	so would the part number be 18201490022 and 18201490023 for the hangers with the straight and the 90 degree bend

May 21st, 2007, 12:38 PM	#5 (permalink)
jame5_b MINI2 Newbie Join Date: Oct 2006 Local Time: 11:01 PM Posts: 18 Offline	ok thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)