MINI2

Richard Crofts · Jun 19th, 2007, 03:58 PM

not sure now that JC garages does not exist...try speaking to the guys from JCW who set up thier own new business...can't remember the name of the company but someone will know it.

TBH the motorsport filter was a JCW with the flap removed and the electronics taken out. It essencially the same just that the cold air from the scuttle could be sucked in all the time instead of just above 4000rpm....its a bit noisier too because the hole is there all the time in the scuttle panel.

aid · Jun 19th, 2007, 04:06 PM

nice one cheers

aid · Jun 20th, 2007, 09:39 AM

ok so spoke to my dealer last night with relation to tlc warranty etc and there quite happy for me to put a reduced pulley on as long as when it comes to service time i provide the shorter sticker belt

they also have no probs with a induction kit or a re-route pipe woohoo

meenieme · Jun 21st, 2007, 01:21 AM

Quote: Originally Posted by aid (original)

ok so spoke to my dealer last night with relation to tlc warranty etc and there quite happy for me to put a reduced pulley on as long as when it comes to service time i provide the shorter sticker belt

they also have no probs with a induction kit or a re-route pipe woohoo

If your dealer is ok with the parts fitted you should have a written letter and confirmation and have them sign/stamp it that you will still retain your TLC warranty and there are cases where the exact same dealer turn back on their own words and state that you should of have a written letter signed just to back yourself up if you happen to run into trouble with warranty issues.

minigolf · Jun 25th, 2007, 02:32 PM

Alta V1 15%.

AlexFW · Jun 25th, 2007, 07:15 PM

I am fitting the Alta -17% : could I have troubles about reability ?

R56 · Jun 25th, 2007, 07:53 PM

Alta V2 15% and KN Typhoon intake and BBR Remap JEEEEEEEEZ Does it fly or what,and torque steers like hell when you boot it. :-)

Roadrunner_1 · Jun 27th, 2007, 04:56 PM

I have a hartge pulley

AlexFW · Jul 2nd, 2007, 07:16 PM

Quote: Originally Posted by AlexFW (original)

I am fitting the Alta -17% : could I have troubles about reability ?

Fitted . No map required .
Can't wait to test the car with new pulley, when I will pick up it from the dealer!

meenieme · Jul 3rd, 2007, 12:28 AM

Quote: Originally Posted by Roadrunner_1 (original)

I have a hartge pulley

how many % reduced is the hartge pulley ?

MINIMANIAUK · Jul 3rd, 2007, 06:16 PM

Its about 13% ------ see hartge and 15% pulley pic

Jun 25th, 2007, 02:32 PM	#45 (permalink)
minigolf Blue is the colour! Join Date: Jul 2003 Location: Canberra, Australia Local Time: 08:56 AM Posts: 13,849 Offline	Alta V1 15%. Sabine Schmitz: Fear disturbs your concentration.

Jul 2nd, 2007, 07:16 PM	#49 (permalink)
AlexFW MINI2 Regular Join Date: Apr 2007 Local Time: 10:56 PM Posts: 61 Offline	Quote: Originally Posted by AlexFW (original) I am fitting the Alta -17% : could I have troubles about reability ? Fitted . No map required . Can't wait to test the car with new pulley, when I will pick up it from the dealer! Last edited by AlexFW : Jul 2nd, 2007 at 09:56 PM.

Jul 3rd, 2007, 06:16 PM	#51 (permalink)
MINIMANIAUK MINI2 Sponsor Join Date: Mar 2006 Local Time: 09:56 PM Posts: 1,080 Offline	Its about 13% ------ see hartge and 15% pulley pic Attached Thumbnails www.minimaniauk.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
15% SC + 2% crank pulley or 17% SC pulley?	mobile23	Engine & Drivetrain Tuning	49	Jul 7th, 2007 06:19 AM
How much more HP/TQ does the 19% pulley give over a 15% pulley?	05MCSConvertible	Engine & Drivetrain Tuning	1	Sep 27th, 2005 11:06 PM
stock MCS crank pulley the same as stock MC pulley?	mini_macky	Engine & Drivetrain Tuning	5	Aug 24th, 2005 05:35 PM
Pulley?	Fisher	Engine & Drivetrain Tuning	2	Apr 7th, 2005 02:23 PM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Jun 19th, 2007, 03:58 PM	#41
Richard Crofts THE STICK Join Date: Feb 2003 Location: Worcestershire WR15 Local Time: 09:56 PM Posts: 3,261 Offline	not sure now that JC garages does not exist...try speaking to the guys from JCW who set up thier own new business...can't remember the name of the company but someone will know it. TBH the motorsport filter was a JCW with the flap removed and the electronics taken out. It essencially the same just that the cold air from the scuttle could be sucked in all the time instead of just above 4000rpm....its a bit noisier too because the hole is there all the time in the scuttle panel.

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jun 19th, 2007, 04:06 PM	#42 (permalink)
aid i love that noise My Classifieds Join Date: Feb 2007 Location: hamilton Local Time: 10:56 PM Posts: 278 Offline	nice one cheers

Jun 20th, 2007, 09:39 AM	#43 (permalink)
aid i love that noise My Classifieds Join Date: Feb 2007 Location: hamilton Local Time: 10:56 PM Posts: 278 Offline	ok so spoke to my dealer last night with relation to tlc warranty etc and there quite happy for me to put a reduced pulley on as long as when it comes to service time i provide the shorter sticker belt they also have no probs with a induction kit or a re-route pipe woohoo

Jun 21st, 2007, 01:21 AM	#44 (permalink)
meenieme MINI2 Newbie Join Date: Aug 2006 Local Time: 07:56 AM Posts: 42 Offline	Quote: Originally Posted by aid (original) ok so spoke to my dealer last night with relation to tlc warranty etc and there quite happy for me to put a reduced pulley on as long as when it comes to service time i provide the shorter sticker belt they also have no probs with a induction kit or a re-route pipe woohoo If your dealer is ok with the parts fitted you should have a written letter and confirmation and have them sign/stamp it that you will still retain your TLC warranty and there are cases where the exact same dealer turn back on their own words and state that you should of have a written letter signed just to back yourself up if you happen to run into trouble with warranty issues.

Jun 25th, 2007, 07:15 PM	#46 (permalink)
AlexFW MINI2 Regular Join Date: Apr 2007 Local Time: 10:56 PM Posts: 61 Offline	I am fitting the Alta -17% : could I have troubles about reability ?

Jun 25th, 2007, 07:53 PM	#47 (permalink)
R56 MINI2 Regular Join Date: Jan 2006 Location: OXFORD Local Time: 09:56 PM Posts: 66 Offline	Alta V2 15% and KN Typhoon intake and BBR Remap JEEEEEEEEZ Does it fly or what,and torque steers like hell when you boot it. :-)

Jun 27th, 2007, 04:56 PM	#48 (permalink)
Roadrunner_1 MINI2 Regular Join Date: Jun 2007 Local Time: 09:56 PM Posts: 65 Offline	I have a hartge pulley

Jul 3rd, 2007, 12:28 AM	#50 (permalink)
meenieme MINI2 Newbie Join Date: Aug 2006 Local Time: 07:56 AM Posts: 42 Offline	Quote: Originally Posted by Roadrunner_1 (original) I have a hartge pulley how many % reduced is the hartge pulley ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)