MINI2

addz · Jul 9th, 2007, 07:51 PM

hi all, i'm pretty sure this has been asked before but the only threads i found went into a bit too much detail and confused me to be honest

basicly i have a standard mini cooper s and ive read that getting a 15% smaller pully makes a bit of diffence...
can i just stick a 15% pully and belt on and drive off or will anything else need to be done?
thanx adam

Loui · Jul 9th, 2007, 08:04 PM

Yes you can just get a Pulley fitted an drive away, no need to remap the car, but i would get the car rolling roaded with the timing an fueling being checked to make sure everything is running fine. I would highly recomend the guys at 1320 autos :-

WELCOME TO 1320autos.com

addz · Jul 9th, 2007, 08:07 PM

wonderful thanx a lot

what kind of power increase will i expect to get from this?

Loui · Jul 9th, 2007, 08:16 PM

Look at this for a bit of an example:-

http://www.mini2.com/forum/mini-coop...ey-fitted.html

Pulley an quality exhaust gave quite a good gain in power

addz · Jul 9th, 2007, 08:19 PM

excellent, well i hope to get a milltek system when funds allow but until then i may get one of my boxes removed and bypassed

Loui · Jul 9th, 2007, 08:21 PM

Quote: Originally Posted by addz (original)

excellent, well i hope to get a milltek system when funds allow but until then i may get one of my boxes removed and bypassed

Id just save the money an get a miltek when you can afford it

addz · Jul 9th, 2007, 09:41 PM

yeah that was my plan but i can get it bypassed and fitted and stuff for £60 so it will keep me amused while i save

Jul 9th, 2007, 07:51 PM	#1
addz MINI2 Newbie Join Date: May 2007 Location: mansfield/notts Local Time: 10:58 PM Posts: 21 Offline	15% pully hi all, i'm pretty sure this has been asked before but the only threads i found went into a bit too much detail and confused me to be honest basicly i have a standard mini cooper s and ive read that getting a 15% smaller pully makes a bit of diffence... can i just stick a 15% pully and belt on and drive off or will anything else need to be done? thanx adam

Jul 9th, 2007, 08:04 PM	#2 (permalink)
Loui 230whp an counting My Classifieds Join Date: May 2002 Location: Mini Addiction Local Time: 09:58 PM Posts: 3,036 Offline	Yes you can just get a Pulley fitted an drive away, no need to remap the car, but i would get the car rolling roaded with the timing an fueling being checked to make sure everything is running fine. I would highly recomend the guys at 1320 autos :- WELCOME TO 1320autos.com WWW.MINIADDICTION.CO.UK

Jul 9th, 2007, 08:16 PM	#4 (permalink)
Loui 230whp an counting My Classifieds Join Date: May 2002 Location: Mini Addiction Local Time: 09:58 PM Posts: 3,036 Offline	Look at this for a bit of an example:- http://www.mini2.com/forum/mini-coop...ey-fitted.html Pulley an quality exhaust gave quite a good gain in power WWW.MINIADDICTION.CO.UK

Jul 9th, 2007, 08:21 PM	#6 (permalink)
Loui 230whp an counting My Classifieds Join Date: May 2002 Location: Mini Addiction Local Time: 09:58 PM Posts: 3,036 Offline	Quote: Originally Posted by addz (original) excellent, well i hope to get a milltek system when funds allow but until then i may get one of my boxes removed and bypassed Id just save the money an get a miltek when you can afford it WWW.MINIADDICTION.CO.UK

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jul 9th, 2007, 08:07 PM	#3 (permalink)
addz MINI2 Newbie Join Date: May 2007 Location: mansfield/notts Local Time: 10:58 PM Posts: 21 Offline	wonderful thanx a lot what kind of power increase will i expect to get from this?

Jul 9th, 2007, 08:19 PM	#5 (permalink)
addz MINI2 Newbie Join Date: May 2007 Location: mansfield/notts Local Time: 10:58 PM Posts: 21 Offline	excellent, well i hope to get a milltek system when funds allow but until then i may get one of my boxes removed and bypassed

Jul 9th, 2007, 09:41 PM	#7 (permalink)
addz MINI2 Newbie Join Date: May 2007 Location: mansfield/notts Local Time: 10:58 PM Posts: 21 Offline	yeah that was my plan but i can get it bypassed and fitted and stuff for £60 so it will keep me amused while i save

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pully kit	05cooper	Engine & Drivetrain Tuning	7	Jan 9th, 2006 08:08 AM
How do I know if I have small SC pully	thespankyone	Engine & Drivetrain Tuning	5	Oct 5th, 2005 10:25 PM
Where to get my 15% pully fitted?	soibui	Engine & Drivetrain Tuning	2	Jun 17th, 2005 01:35 PM
Just a JCW pully	Jaffa Racer	Engine & Drivetrain Tuning	4	Jun 11th, 2004 06:22 PM
Pully and A/C?	DarkMiniCooperS	Engine & Drivetrain Tuning	2	May 1st, 2004 09:38 PM