MINI2

Perm · May 8th, 2008, 04:12 PM

Hi,

Does anyone have any experience of using a Milltek exhaust manifold with the stock MCS exhaust system ?

If so is this a quieter combination especially at motorway speeds when compared to a full Milltek exhaust system ( manifold and cat back) and say revving the car over 3500 revs.

Also do you still see the power gains from the manifold when combined with the stock exhaust system?

Thanks

Perm

Jaw_F430 · May 8th, 2008, 04:30 PM

Quote: Originally Posted by Perm (original)

Hi,

Does anyone have any experience of using a Milltek exhaust manifold with the stock MCS exhaust system ?

If so is this a quieter combination especially at motorway speeds when compared to a full Milltek exhaust system ( manifold and cat back) and say revving the car over 3500 revs.

Also do you still see the power gains from the manifold when combined with the stock exhaust system?

Thanks

Perm

If you look at bigshows mods and you can see he has a janspeed mani +miltek cat back and made good power.

He then swapped the catback to standard one and still made 272bhp so we know the stock exhaust can flow enough to produce very good bhp

P.S I am running a janspeed mani +cat and have the stock exhaust on and it is very quiet. I did run the mani with the JCW catback and above 3k it was too loud for me

Hope this is of help

BigShow300 · May 8th, 2008, 07:35 PM

Quote: Originally Posted by Jaw_F430 (original)

If you look at bigshows mods and you can see he has a janspeed mani +miltek cat back and made good power.

He then swapped the catback to standard one and still made 272bhp so we know the stock exhaust can flow enough to produce very good bhp

P.S I am running a janspeed mani +cat and have the stock exhaust on and it is very quiet. I did run the mani with the JCW catback and above 3k it was too loud for me

Hope this is of help

What he said..

It felt like driving a Prius after fitting the stock one because I'd got so used to the Milltek but the stock has still got a nice rasp to it under WOT

Power wise check out this http://www.mini2.com/forum/engine-dr...gain-loss.html

Perm · May 8th, 2008, 10:34 PM

thanks for the input.

I currently find the full milltek system a bit loud..... hence trying to find a way of keeping the performance gains but losing some of the noise.........

I think a Milltek manifold paired with the stock exhaust may be an answer,,,,,, however I expect I will miss some of that burble.

Perm

May 8th, 2008, 04:12 PM	#1
Perm MINI2 Senior Join Date: Jul 2003 Location: Nottinghamshire Local Time: 10:25 PM Posts: 479 Online	Milltek Manifold and Stock MCS exhaust ? Hi, Does anyone have any experience of using a Milltek exhaust manifold with the stock MCS exhaust system ? If so is this a quieter combination especially at motorway speeds when compared to a full Milltek exhaust system ( manifold and cat back) and say revving the car over 3500 revs. Also do you still see the power gains from the manifold when combined with the stock exhaust system? Thanks Perm

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Janspeed Manifold & Milltek Exhaust Review	futureal33	Engine & Drivetrain Tuning	15	Mar 22nd, 2007 06:23 PM
Video of Milltek Manifold and exhaust	Ant FR	Engine & Drivetrain Tuning	12	Feb 8th, 2007 02:58 PM
Wanted: Stock MCS (03) exhaust and Manifold	supercoopers	For Sale	0	Apr 10th, 2006 11:25 AM
Milltek Manifold and Stock Exhaust?	supercoopers	Engine & Drivetrain Tuning	3	Nov 26th, 2004 02:56 AM
Milltek Exhaust manifold	GRSmotorsport	Engine & Drivetrain Tuning	6	Sep 16th, 2004 06:11 PM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

May 8th, 2008, 04:30 PM	#2 (permalink)
Jaw_F430 MINI2 Senior Join Date: Jul 2007 Location: 7600rpm Local Time: 10:25 PM Posts: 670 Online	Quote: Originally Posted by Perm (original) Hi, Does anyone have any experience of using a Milltek exhaust manifold with the stock MCS exhaust system ? If so is this a quieter combination especially at motorway speeds when compared to a full Milltek exhaust system ( manifold and cat back) and say revving the car over 3500 revs. Also do you still see the power gains from the manifold when combined with the stock exhaust system? Thanks Perm If you look at bigshows mods and you can see he has a janspeed mani +miltek cat back and made good power. He then swapped the catback to standard one and still made 272bhp so we know the stock exhaust can flow enough to produce very good bhp P.S I am running a janspeed mani +cat and have the stock exhaust on and it is very quiet. I did run the mani with the JCW catback and above 3k it was too loud for me Hope this is of help

May 8th, 2008, 07:35 PM	#3 (permalink)
BigShow300 Banned My Classifieds Join Date: Aug 2007 Local Time: 10:25 PM Posts: 917 Offline	Quote: Originally Posted by Jaw_F430 (original) If you look at bigshows mods and you can see he has a janspeed mani +miltek cat back and made good power. He then swapped the catback to standard one and still made 272bhp so we know the stock exhaust can flow enough to produce very good bhp P.S I am running a janspeed mani +cat and have the stock exhaust on and it is very quiet. I did run the mani with the JCW catback and above 3k it was too loud for me Hope this is of help What he said.. It felt like driving a Prius after fitting the stock one because I'd got so used to the Milltek but the stock has still got a nice rasp to it under WOT Power wise check out this http://www.mini2.com/forum/engine-dr...gain-loss.html

May 8th, 2008, 10:34 PM	#4 (permalink)
Perm MINI2 Senior Join Date: Jul 2003 Location: Nottinghamshire Local Time: 10:25 PM Posts: 479 Online	thanks for the input. I currently find the full milltek system a bit loud..... hence trying to find a way of keeping the performance gains but losing some of the noise......... I think a Milltek manifold paired with the stock exhaust may be an answer,,,,,, however I expect I will miss some of that burble. Perm

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)