MINI2

TorqueSteer · Sep 11th, 2008, 07:57 PM

Hi all

I have a milltek cat-back exhaust which my local exhaust guy is going to fit this saturday. The exhaust was bought from lohen. My question is do these exhausts come with everything required for fitting. In the box it came in there was

the exhaust sections (3 off)
one gasket
two 58mm diameter band clamps
The associated bolts, nuts and washer for the clamps

Thanks in advance

Darthbladerni · Sep 11th, 2008, 08:02 PM

Indeed they do!

Mine had everything but the place who fitted it didnt use the brackets or gaskets from the pack that lohen sent! :@

So i refitted it myself one day and i wish I would have done it myself originally.

Good luck with it anyway

Lucky Dave · Sep 11th, 2008, 08:27 PM

If its for a S model then you may need a few spacer washers to lower the system so it does not rub your bumper.

OZChris · Sep 11th, 2008, 10:13 PM

All the bits and pieces should be there in the pack. The only thing that you may need to change, and it depends on the age of your MINI, is the exhaust hangers (red plastic things) - I have seen a fair few that have broken/worn with age.

NeuroBeaker · Sep 12th, 2008, 12:16 AM

The place that fitted my Milltek exhaust (also from Lohen) this past summer said I needed some sort of rubber washers - as my old ones had corroded. They suggested I get that seen to by BMW or bring it back with the parts for them within the year.

The MINI is going back to BMW this Monday for some disturbing electrical problems - so I'll probably just ask them to sort that out for me then too.

All the best,
Andrew.

TorqueSteer · Sep 12th, 2008, 05:38 PM

Thanks for all your advice guys. ill just hope i dont need new hangers!!! (its an 2003 cooper)

Sep 11th, 2008, 07:57 PM	#1
TorqueSteer MINI2 Newbie Join Date: Jul 2008 Location: Aberdeenshire Local Time: 09:17 PM Posts: 4 Offline	Milltek fitting Hi all I have a milltek cat-back exhaust which my local exhaust guy is going to fit this saturday. The exhaust was bought from lohen. My question is do these exhausts come with everything required for fitting. In the box it came in there was the exhaust sections (3 off) one gasket two 58mm diameter band clamps The associated bolts, nuts and washer for the clamps Thanks in advance

Sep 11th, 2008, 08:27 PM	#3 (permalink)
Lucky Dave Thinking Minis My Classifieds Join Date: Jun 2005 Local Time: 09:17 PM Posts: 811 Offline	If its for a S model then you may need a few spacer washers to lower the system so it does not rub your bumper. For All Your Mini's Needs 01905 620011

Sep 12th, 2008, 12:16 AM	#5 (permalink)
NeuroBeaker Must.. keep... smiling... Join Date: Feb 2007 Location: Behind the wheel Local Time: 09:17 PM Posts: 6,444 Offline	The place that fitted my Milltek exhaust (also from Lohen) this past summer said I needed some sort of rubber washers - as my old ones had corroded. They suggested I get that seen to by BMW or bring it back with the parts for them within the year. The MINI is going back to BMW this Monday for some disturbing electrical problems - so I'll probably just ask them to sort that out for me then too. All the best, Andrew. NeuroBeaker - Proud owner of "Zeus" (a 'slightly modified' 2004 MINI ONE). *WARNING!* Thesis writing in progress. Experiments continue. Multi-tasking? Explosion imminent!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Milltek Exhaust Fitting (gaskets etc)	futureal33	Engine & Drivetrain Tuning	4	Jan 24th, 2007 06:59 PM
Milltek exhaust fitting	pubert	Engine & Drivetrain Tuning	4	Jul 21st, 2006 06:52 PM
AMD Fitting my Milltek	wilmanlee	Engine & Drivetrain Tuning	13	May 6th, 2006 09:18 PM
Milltek Exhaust Fitting	wilmanlee	Engine & Drivetrain Tuning	2	Apr 25th, 2006 07:44 PM
Fitting a Milltek Exhaust	Richard M	Engine & Drivetrain Tuning	1	Apr 8th, 2005 01:18 PM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Sep 11th, 2008, 08:02 PM	#2 (permalink)
Darthbladerni Mini Youngster Join Date: Oct 2007 Location: Northern Ireland Local Time: 09:17 PM Posts: 2,268 Offline	Indeed they do! Mine had everything but the place who fitted it didnt use the brackets or gaskets from the pack that lohen sent! :@ So i refitted it myself one day and i wish I would have done it myself originally. Good luck with it anyway

Sep 11th, 2008, 10:13 PM	#4 (permalink)
OZChris MINI2 Master Join Date: Nov 2002 Location: Melbourne, Australia Local Time: 08:17 AM Posts: 2,507 Offline	All the bits and pieces should be there in the pack. The only thing that you may need to change, and it depends on the age of your MINI, is the exhaust hangers (red plastic things) - I have seen a fair few that have broken/worn with age.

Sep 12th, 2008, 05:38 PM	#6 (permalink)
TorqueSteer MINI2 Newbie Join Date: Jul 2008 Location: Aberdeenshire Local Time: 09:17 PM Posts: 4 Offline	Thanks for all your advice guys. ill just hope i dont need new hangers!!! (its an 2003 cooper)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)