MINI2

GTT 280 · Jan 14th, 2003, 12:14 PM

Hi,

All the performance improvements seem to state the BHP at 200+ but can anybody tell me what the highest torque available on an MCS with any modifications is?

Any actual examples of performance products to get to this max torque value would be great.

Cheers,

EB.

GTT 280 · Jan 15th, 2003, 07:32 PM

Can the torque be increased on the MINI engine as this would mean a change in camshaft design ??

Anybody ?

KLF · Jan 15th, 2003, 08:23 PM

Have you not read all the many many Hartge 212-215bhpMCS conversion threads then?? The torque is increased from 155lb ft @4000rpm(Stock)to 184lb ft @3600rpm. And probably more when they finish their exhaust manifold. I don't know of any higher than this at present.
The JCWorks S uses larger valve cylinder head plus similar mods to induction and Kompressor so might produce more torque?? I don't know.
Not sure about the cams, I know Piper have produced cams for the One/Cooper.

chris

bcbeme · Jan 15th, 2003, 10:29 PM

in general if hp goes up then torque goes up, unless you raise the redline then you get 180-hp toyota matrix's that can't get out of their own way.

Jan 14th, 2003, 12:14 PM	#1
GTT 280 The Power Cube My Classifieds Join Date: Jan 2002 Local Time: 10:37 PM Posts: 2,503 Offline	Max Torque Hi, All the performance improvements seem to state the BHP at 200+ but can anybody tell me what the highest torque available on an MCS with any modifications is? Any actual examples of performance products to get to this max torque value would be great. Cheers, EB.

Jan 15th, 2003, 08:23 PM	#3 (permalink)
KLF Hmm....silly name now Join Date: Oct 2002 Location: Durham Local Time: 10:37 PM Posts: 347 Offline	Have you not read all the many many Hartge 212-215bhpMCS conversion threads then?? The torque is increased from 155lb ft @4000rpm(Stock)to 184lb ft @3600rpm. And probably more when they finish their exhaust manifold. I don't know of any higher than this at present. The JCWorks S uses larger valve cylinder head plus similar mods to induction and Kompressor so might produce more torque?? I don't know. Not sure about the cams, I know Piper have produced cams for the One/Cooper. chris (51) Renaultsport Clio 172 ! - I know I know ........ It was cheap alright

Jan 15th, 2003, 10:29 PM	#4 (permalink)
bcbeme MINI2 Regular Join Date: Apr 2002 Location: new hampshire Local Time: 05:37 PM Posts: 58 Offline	in general if hp goes up then torque goes up, unless you raise the redline then you get 180-hp toyota matrix's that can't get out of their own way. Bcbeme Always yield to temptation, It may never pass your way again - RAH http://www.playboy.com/livinginstyle/features/mini/index.html

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Max Torque MCSa	MacFever	CVT & Automatic	2	Sep 13th, 2005 09:49 PM
max torque - rpm	Cooper S Ire	MINI Cooper S	2	Jan 10th, 2005 03:26 PM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jan 15th, 2003, 07:32 PM	#2 (permalink)
GTT 280 The Power Cube My Classifieds Join Date: Jan 2002 Local Time: 10:37 PM Posts: 2,503 Offline	Can the torque be increased on the MINI engine as this would mean a change in camshaft design ?? Anybody ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)