MINI2

TheInca · May 10th, 2003, 09:35 AM

Just wondering if anyone who has done the 15% reduction Pulley experienced any major mechanical problems with their S and have regreted doing the mod. because it voided the warranty.

I am on the fence on whether I am going to pluck down the Money for the JW mod or go aftermarket and get even more mods.

Mugami · May 11th, 2003, 12:54 AM

only problem ive had after installing the pulley. Is the fact that I ran the dragon to hard, over heated the brakes and melted 5 Stud bolts on my rotors. But then again I would have done that without the pulley.

Btw I had the rotor converted to Studs and not the Lug bolts that it uses normally. Unforturnatly the Studs seemed to be light wieght Aluminum. Switched now to Steel studs.

minime s · May 11th, 2003, 09:37 AM

No problems with JLM's pulley at all.

We have 3 cars running it now for a total of over 7000 miles

May 10th, 2003, 09:35 AM	#1
TheInca MINI2 Newbie Join Date: May 2003 Location: Texas and Miami Beac Local Time: 10:05 AM Posts: 26 Offline	Any problems w/ S that have had the 15% pulley Mod Just wondering if anyone who has done the 15% reduction Pulley experienced any major mechanical problems with their S and have regreted doing the mod. because it voided the warranty. I am on the fence on whether I am going to pluck down the Money for the JW mod or go aftermarket and get even more mods.

May 11th, 2003, 12:54 AM	#2 (permalink)
Mugami MINI2 Master Join Date: May 2002 Local Time: 12:05 PM Posts: 1,215 Offline	only problem ive had after installing the pulley. Is the fact that I ran the dragon to hard, over heated the brakes and melted 5 Stud bolts on my rotors. But then again I would have done that without the pulley. Btw I had the rotor converted to Studs and not the Lug bolts that it uses normally. Unforturnatly the Studs seemed to be light wieght Aluminum. Switched now to Steel studs. 02 MCS DS/W (Totaled November 02 on Fall Folage Run) 03 MCS DS/W (See my MINI Profie for extensive list of mods)

May 11th, 2003, 09:37 AM	#3 (permalink)
minime s M7SPEED SPONSORED MINI ! Join Date: Jul 2002 Location: Dix Hills,New York Local Time: 12:05 PM Posts: 644 Offline	No problems with JLM's pulley at all. We have 3 cars running it now for a total of over 7000 miles 1/4 mile 13.07 @109mph...258 wheel horsepower, 03 cooper"S" Pure Silver,18" Kahn's,Aero Kit,Nitrous Express NOS kit(50 shot),Evotech Computer upgrade,ALTA intake,short shifter,Magnaflow exhaust,header,pulley upgrade,cam,H&R springs,quaife,MSD Coil a

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Any mod after supercharge pulley?	E-Gun	Engine & Drivetrain Tuning	10	Oct 12th, 2007 09:12 AM
Pulley mod	Mini_Jen	Northern California Region	1	Oct 28th, 2004 04:59 AM
Pulley mod?	RickB	Pacific Northwest Region	5	Apr 16th, 2004 12:45 PM
Will Pulley mod affect warranty???	Faat	Engine & Drivetrain Tuning	1	Mar 30th, 2004 05:11 AM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)