[Paul]

Hello,

There's been a few threads on MINI over time about 1/4 mile run times and also 0-60 times of different MINIs.

I thought it would be good if we could start to try and compile people's different experiences.

I'd like to know results of timed 0-60 and/or 1/4 mile runs, and I'm sure a lot of others would like to hear too.

But please no "stop watch" figures, only results using testing equipment such as a member of the G-Tech family (http://www.gtechpro.com/) or the Race Technology range (http://www.race-technology.com/WebPa.../Products.html) or a drag strip (http://www.santapod.com/), or other verified/trusted measuring device!

It would also be nice if people could post the specs of their car, the tempurature (if known), what mods have been done, fuel levels etc, so we can try and get an idea of how things really compare to each other.

This isn't a competition, but just a place to compile some facts that others might find useful. No "that's BS" or "mines better than yours" type talk please!

This isn't a "banter" thread either, sorry to sound a bit blunt, but we can discuss this thread and methods etc. elsewhere!

Thank you!

Also, in addition to this thread for 0-60 and 1/4 mile times, Andy has his own page of 1/4 mile times he's been compiling at:

http://www.ross-tech.net/andy/mini/...uartermile.html

That is for official drag strip times only, NOT those using other measuring/data capture tools.

[punkeyfunky]

MC CVT, March 03, 34K on ****

Mods:
Sparco seats (weight saving), K&N 57i, PlayMINI cat back, OneClick
17" s-spokes (heavier)

Conditions:
Dry, road straight but with slight incline, approx 16C
Driver + passenger, 3/4 tank fuel.
Box in 'manual' mode, with ASC turned off.

Tested with RaceTech AP22

0-60: 11.75s

I'm sure it can do better than that.



-Lee

[MiniRick]

I attended the 2003 Showdown at the Shakespeare County Raceway. This was my first visit to such an event, a complete novice but I had a few runs and eventually posted this with Traction Control OFF: (plus 3/4 tank of Petrol BP Superplus)

Reaction: 1.006
60ft 2.581
330ft 6.668
660ft 10.065 @71.77mph
990ft 12.919
1320ft 15.446 @ 92.59mph

Weather was hot 84F
Car details: 2003 Cooper 'S' Works, no.S422. 5,500miles No other mods.

[minigolf]

I was contacted by IML337, an Aussie MINI2er, who ran a best time of 15.1 seconds in his Cooper S for the quarter mile at Sydney's Eastern Creek dragstrip today. I'll have to get him to post weather/fuel info etc. I can tell you his MCS has had NO engine modifications.

[Juno]

Good to put this data all in one place. Using a gtechpro, here's what I posted on another thread: -



Mine is a standard cooper with not even a panel filter : We were two-up (maybe 150 kg combined), half a tank of regular unleaded fuel, 16" alloys with heavy runflat tyres: -

First run was 9.17s (wheelspin)
then 9.14s (wheelspin again)
less revs needed we thinks ...
9.28s (bogged down D'uh!)
so again with 4,500 revs but more slowly off the clutch: -
8.88s thats better
then again : 8.69s : the best time we were able to record.

During one of the later runs (but I'm not sure which) we also recorded a standing quarter mile time of 16.92s at 84.2mph.

Finally we logged the 60-0 braking performance. The ABS worked overtime and stopped us in 156 feet. I have no idea how this compares to factory or improved data, anybody? (dry road, maybe 15 degrees centigrade)

The lesson learned was to monitor, modify technique, improve.

...

8.69s from a std cooper is quite reasonable I think




Juno

[cristo]

these are done with a tazzo vpc ( www.tazzo.com )

MC 5speed without sunroof and with 7holes at 40 deg F and a quarter tank gas
0-60mph - 8.95 sec
0-60 ft - 2.54 sec

with 16's at 70 deg F and a full tank
0-60 mph 9.64 sec
0-60 ft 2.65 sec

launches were on the mild side, don't want to
abuse the clutch or tranny

can also do avg hp between 2 speeds - remember, this counts air and rolling friction losses:
all these are in 2nd gear - average of several runs - input weight adjusted for differences in
gas tank fill and which wheels/tires on the car --only a couple hp less at 70 deg than 40deg:
15-30 mph- 33.5hp midpoint rpm is 2500
25-40 mph- 52 hp midpoint rpm is 3600
30-50 mph- 64 hp midpoint rpm is 4450
40-55 mph- 73 hp midpoint rpm is 5300
50-60 mph- 72 hp midpoint rpm is 6100

[Johan]

Mini Cooper S 2003
Mods: Kelleners Sport Enging-kit (Pulley+ECU, revlimit 7500rpm) Kelleners Sport Cat-back, Pipercross CAI
160kW / 248Nm dynoed
Dunlop Sport Maxx tires (215/40 17") Orginal S-lites

Temp: +7C and dry road

Tested with a Gtech Pro Competition
1/4 tank of gas, no bakseat, front seats switched to Cobra Suzukas

60ft 2,432s
330ft 6,339s
1/8mi 9,476 @ 79,33 mph
1000ft 12,173s
1/4mi 14,452@ 99,04mph
0-60mph 6,524s
0-100km/h 6,812s

[mutilator]

0-60 in 9.0somethin seconds
(according to ODB2)

Standard mini cooper 17"Swheels
Sports suspension

thats it.
ill do some quater mile readouts on my ODB2 soon.

tom.

[Kiwiracer]

0-60 6.1 secs
1/4 mile 14.55 secs
70 degrees
Beltronics "Vector" series

[sergio rollerfunk]

Measured with a G-Tech Pro Comp, this is my best run so far (out of six):

----------------------------------Conditions------------------------------------
Temperature: 40 degrees
Altitude: 6,000 ft. (1.800 mts.)
91 Octane gas (my DT ECU was set to run 93 octane minimum, but 91 is the only available in CO.)
Mods: Digi-Tec 210 hp Conversion + Madness Intake (Borla Race Exhaust not installed yet).
17" S-lites with run-flats
Half tank of gas
2,820lbs. total weight (Including myself, 180lbs)


60ft_______2.493
330ft______ 6.484
1/8 mi______9.796@75.66
1000ft______12.636
1/4 mi______15.01@95.58
0-60mph_____7.139
0-80mph_____11.310
0-100mph_____16.958

Keep in mind that despite the cold temperature, loss of power at 6,000ft. is about 16-18%, 40 hp aprox.
My best friend brought here to Colorado his heavily modified Subaru WRX (dynoed at 431hp at the crank), and his best run was a dissapointing 13.6@102mph. (His best time is 12.7@109 at 2,000 ft.).

Using the very conservative Tripod altitude conversion calculator, (http://members.tripod.com/~MY5LTRLXCPE/altitude.html), my time at sea level indicates a more realistic 14.54@98.38mph.

Cheers

[sergio rollerfunk]

ups...the temperature was 40 F (around +4C)

[Paul]

Max (and others) can you put the details of the recording equipment and as many other details as possible (like specs and so on).



Thank you.

[Andy@Ross-Tech.com]

14.719 @ 95.75 mph
2.479 s 60-ft

Helix/P&D 15% pulley, Alta intake, Magnaflow cat-back

[DinkaDonka]

Hartge MCS with no other mods (at that time), fully loaded with options & and a 16 stone driver and 28 oC! hehe , cannot comment on timing gear but i ran at elvington and they had all the top notch equipment , that all i can say so i imagine its very accurate , kept running consecutive 15.5s runs , oh , also 18" breyton wheels , absolutley gutted! I assure you this had nothing to do with the driver b4 we even go into that , i wasnt happy with the Hartge conversion for a while , this just confirms my dissapointment , may have something to do with the weight / temp but very very poor none the less , i shall be doing some testing in the track car soon so i shall report on that too.

Cheers,
Paul

[IML337]

Quote: Originally Posted by minigolf

I was contacted by IML337, an Aussie MINI2er, who ran a best time of 15.1 seconds in his Cooper S for the quarter mile at Sydney's Eastern Creek dragstrip today. I'll have to get him to post weather/fuel info etc. I can tell you his MCS has had NO engine modifications.

At Sydney's WSID complex, my fully optioned and totally standard Cooper S did the following time:

60' 2.436
330' 6.560
660' 9.872 - 74.13mph
1000' 12.719
ET 15.141 - 92.34mph

Ambient temp was about 15-18 degrees C I think.

Oh, by the way, the car has 17x7" BBS RK rims and Yokohama AVS ES100 tyres, instead of 17" s-spokes and runflats.

*edit* Fuel was standard 98RON pump fuel, altitude was about 60m(?) and date was May 22 2004

[Mugami]

03 MCS Tested with G-Tech Pro. Full interior 15% pully and Supertrapp exhaust. temp according to reading off tach. "edit" this is times i posted when i did the before and after tests. which were conduct at an old airport. upon which i gave no time for Heat soak to happen.
http://www.mini2.com/forum/showthrea...ght=G-tech+pro
.................................................. ........outside
Stock...........supertrapps...S/C pully......temp 55f
ET.......15.594......15.056........14.620.......14 .399
speed.88.69mph.....92.33.........97.82........98.9 6
0-60....7.079.......6.509.........6.111........5.868
60'.....2.476........2.433.........2.474........2. 448
hp......111.7........124.7.........145.6........15 2.0
tq......112.6........131.1.........134.4........15 6.3

at drag strip same mods. "unable to find the slip but adj time per unoffical data base"
Temp 95 deg / quarter- 15.18 / G-tech showed 14.91 on same run.

Dynoed at race 154hp with no fan on the Intercooler

At Strip with Mods as shown in sig
Temp 86 deg / quarter- 14.81 / sorry forgot to bring the G-tech
R/T : .005
60' : 2.301
330: 6.241
1/8: 9.539 / 74.36
1000: 12.388
1/4: 14.816 / 92.76
just found my time slip.
One thing to note. At strip im doing Bracket racing Launches were at 2k with shifts at 6k.

[sergio rollerfunk]

Quote: Originally Posted by Mugami

03 MCS Tested with G-Tech Pro. Full interior 15% pully and Supertrapp exhaust. temp according to reading off tach.

Temp 72 deg / quarter - 14.52
Temp 55 deg / quarter - 14.39

at drag strip same mods
Temp 95 deg / quarter- 15.09 / G-tech showed 14.91 on same run.

At Strip with Mods as shown in sig
Temp 86 deg / quarter- 14.81 / sorry forgot to bring the G-tech

One thing to note. At strip im doing Bracket racing Launches were at 2k with shifts at 6k.

Mugami,

Are u running at sea-level? What was your trap speed for those runs?

[Mugami]

I've posted the times before.. as i find where i did.. most likly in the "Did a little Drag racing " thread for the two strips... the G-Tech time are in the "Before and after mods" thread i did some time ago. I'll copy those time and edit them to my post.

the strip is not at Sea lvl and i dont know the ALT for the Strip its self. i'll go the VMP's (Virginia Motorsports Park) website and see if its posted there.

http://www.mini2.com/forum/showthread.php?t=29298

#799 <-- note this is the post number for the comparison. its like on page 54
Andy@Ross-Tech.com
MINI2 Sponsor




Join Date: Oct 2002
Location: Lansdale, PA
Local Time: 07:21 AM
Posts: 1,221
Offline
Here's an interesting comparison. Last July, I ran a 14.745 @ 93.61 with my 15% pulley. Here it is plotted with the 14.783 @ 93.73 that I ran last night with the 19%.

[Pepper'D]

hi guys i attended the bmc showdown at the weekend I have a one d with tunit fitted and k&n induction kit

best time for the weekend was:
Reaction: 0.379
60ft 2.531
330ft 7.337
660ft 11.453 @59.88mph
990ft 14.900
1320ft 18.018 @ 74.95mph

[Paul]

Quote: Originally Posted by Paul Mullett

...It would also be nice if people could post the specs of their car, the tempurature (if known), what mods have been done, fuel levels etc, so we can try and get an idea of how things really compare to each other.

This isn't a competition, but just a place to compile some facts that others might find useful. No "that's BS" or "mines better than yours" type talk please!

This isn't a "banter" thread either, sorry to sound a bit blunt, but we can discuss this thread and methods etc. elsewhere!

Thank you!

Done some fairly heavy "cleaning" of this thread. Sorry folks, but please chat elsewhere in this forum, and try to keep this thread "clean" with numbers only.