MINI2

RED RAGE · Nov 5th, 2004, 10:50 PM

I need some more thrust in my take-Off and request a Pulley Reduction

PROBLEM: Noone around here does them !?!

Please help me find an experienced installer and supplier in Cincinnati, OHIO, USA

Phil ... 2,200 miles on an 05 S

onasled · Nov 5th, 2004, 11:03 PM

Do it yourself ??? I did, and it's not that hard.

RED RAGE · Nov 6th, 2004, 12:59 AM

Not a chance I would attempt that myself....

I would much rather watch and wait for someone who knows what they are doing

onasled · Nov 6th, 2004, 03:27 AM

Well, then ask your local Mini dealer. They will do it for around $450 labor.
If you have a good mechanic that you trust, then have him read up on Randy Webb's website and follow his instructions. Any good mechanic can do this job, but a special pulley puller is needed to do so. If you get your pulley from Randy, he will lend you this puller.

haroldchrismeyer · Nov 6th, 2004, 06:35 AM

If you don't find anyone in your area I can do the job, but you have to drive to southern Indiana, just across the river from Louisville. I do the Alta pulley for $150 if you furnish the parts.

Nov 5th, 2004, 10:50 PM	#1
RED RAGE "Big Munch" Join Date: Jun 2004 Location: Cincinnati, OHIO, US Local Time: 04:29 PM Posts: 91 Offline	Want a PULLEY Installed in CINCI, OHIO ? Who does them ? I need some more thrust in my take-Off and request a Pulley Reduction PROBLEM: Noone around here does them !?! Please help me find an experienced installer and supplier in Cincinnati, OHIO, USA Phil ... 2,200 miles on an 05 S __________________________________________________ __ RED and BLACK CHROMED S, Pully, Uni-chip, Miltek, Sway, TCE Brakes.... http://www.mini2.com/gallery/personal/19856/41492.jpg

Nov 6th, 2004, 12:59 AM	#3 (permalink)
RED RAGE "Big Munch" Join Date: Jun 2004 Location: Cincinnati, OHIO, US Local Time: 04:29 PM Posts: 91 Offline	Not a chance I would attempt that myself.... I would much rather watch and wait for someone who knows what they are doing __________________________________________________ __ RED and BLACK CHROMED S, Pully, Uni-chip, Miltek, Sway, TCE Brakes.... http://www.mini2.com/gallery/personal/19856/41492.jpg

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where to have pulley installed in Brisbane	R53MCS	Australia	12	Mar 28th, 2007 01:57 AM
Pulley Installed!!!!!!!!!	Tigger	Engine & Drivetrain Tuning	72	Jun 15th, 2005 12:37 PM
Pulley installer in SW Ohio ?	BLUE BEAUTY	Engine & Drivetrain Tuning	0	Aug 11th, 2004 08:19 PM
Pulley install in cleveland, OHIO	flav	Engine & Drivetrain Tuning	4	Jun 25th, 2004 06:24 PM
So Ohio Pulley Install	mikehome1	Engine & Drivetrain Tuning	9	May 31st, 2003 09:51 AM

MINI2

Fuel for your MINI obsession

From air-filters to exhausts and all in between, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Nov 5th, 2004, 11:03 PM	#2 (permalink)
onasled MINI2 Senior My Classifieds Join Date: Sep 2004 Location: Northeast, Ct Local Time: 05:29 PM Posts: 441 Offline	Do it yourself ??? I did, and it's not that hard.

Nov 6th, 2004, 03:27 AM	#4 (permalink)
onasled MINI2 Senior My Classifieds Join Date: Sep 2004 Location: Northeast, Ct Local Time: 05:29 PM Posts: 441 Offline	Well, then ask your local Mini dealer. They will do it for around $450 labor. If you have a good mechanic that you trust, then have him read up on Randy Webb's website and follow his instructions. Any good mechanic can do this job, but a special pulley puller is needed to do so. If you get your pulley from Randy, he will lend you this puller.

Nov 6th, 2004, 06:35 AM	#5 (permalink)
haroldchrismeyer MINI2 Regular Join Date: Aug 2004 Location: Indiana, USA Local Time: 04:29 PM Posts: 64 Offline	If you don't find anyone in your area I can do the job, but you have to drive to southern Indiana, just across the river from Louisville. I do the Alta pulley for $150 if you furnish the parts.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)