MINI2

nickw · Oct 23rd, 2007, 11:45 AM

Hi, I bought a MCS with fitted 2 x spotlights. I have recently bought a Lohen Black Mesh grill which I am fitting this weekend. To fit this I will have to remove the spotlights, which I am going to leave off. How do I disconnect them and what do I do with the wires, can I just leave them in situ or do I have to remove all the wiring. I dont want to affect anything on the car, so can I just leave them dangling there ?

Sorry if this is a stupid question.

Cheers
Nick

iain cooper · Oct 23rd, 2007, 01:18 PM

what I would do is coil the wires up with a plastic cable clip or similar, making sure that ends are cut and taped up, etc and they are not " dangling " but held in place by a cable clip.

the spotlight wires could be handy in the future for either you or someone else, so I would not remove them.

you could even label them for future reference.

Oct 23rd, 2007, 11:45 AM	#1
nickw MINI2 Regular My Classifieds Join Date: Feb 2005 Local Time: 09:28 PM Posts: 201 Offline	Spot lights help needed Hi, I bought a MCS with fitted 2 x spotlights. I have recently bought a Lohen Black Mesh grill which I am fitting this weekend. To fit this I will have to remove the spotlights, which I am going to leave off. How do I disconnect them and what do I do with the wires, can I just leave them in situ or do I have to remove all the wiring. I dont want to affect anything on the car, so can I just leave them dangling there ? Sorry if this is a stupid question. Cheers Nick

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spot Lights	Matts Mini Adventure	Exterior	20	Oct 26th, 2005 08:54 PM
Spot lights	nickhill	Exterior	4	Sep 30th, 2005 09:31 PM
What do you think to these Spot lights?	Blackaeromini	General Discussion	0	Apr 23rd, 2005 07:36 PM
spot lights	steve1968	Exterior	1	Dec 12th, 2004 05:13 PM
Spot lamp covers..Help needed	Peachiz	Exterior	6	Jun 11th, 2004 01:46 PM

MINI2

Fuel for your MINI obsession

From bodykits to bonnet stripes, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Oct 23rd, 2007, 01:18 PM	#2 (permalink)
iain cooper MINI2 Regular Join Date: Feb 2007 Location: near Glasgow Local Time: 10:28 PM Posts: 275 Offline	what I would do is coil the wires up with a plastic cable clip or similar, making sure that ends are cut and taped up, etc and they are not " dangling " but held in place by a cable clip. the spotlight wires could be handy in the future for either you or someone else, so I would not remove them. you could even label them for future reference.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)