MINI2

GordonD · Oct 8th, 2003, 06:41 PM

I've seached and looked at the FAQ's so please don't flame me if this is covered in a dozen other threads,.

I want to add a badge bar to my MCS and need to drill a couple of holes on the front far enough forward so the hood will still open.

I can't reach iunder so I was looking to take the lower part of the bumper off but am not sure which bolts to loosen it looks like there are two at each side but can anyone give me exact instructions and things to watch out for.

Thanks

jionty · Oct 12th, 2003, 12:15 PM

Hope this link helps. It is to fit a aero grill but it does tell you also how to remove bumper:
http://www.bridger.us/mini/howto/MIN...ll_install.pdf

GordonD · Oct 14th, 2003, 01:35 PM

Quote: Originally Posted by jionty

Hope this link helps. It is to fit a aero grill but it does tell you also how to remove bumper:
http://www.bridger.us/mini/howto/MIN...ll_install.pdf

Thanks for this link. I can get to his main website bu the pdf stuff seems to be having problems. i will try another time.

Oct 8th, 2003, 06:41 PM	#1
GordonD MINI2 Master Join Date: Sep 2002 Location: Mississauga, Ont, Ca Local Time: 07:30 PM Posts: 781 Offline	removing lower front panel I've seached and looked at the FAQ's so please don't flame me if this is covered in a dozen other threads,. I want to add a badge bar to my MCS and need to drill a couple of holes on the front far enough forward so the hood will still open. I can't reach iunder so I was looking to take the lower part of the bumper off but am not sure which bolts to loosen it looks like there are two at each side but can anyone give me exact instructions and things to watch out for. Thanks aka KWKSLVR Member: Southern Ontario MINI Club BMW Club of Canada - Trillium Chapter

Oct 14th, 2003, 01:35 PM	#3 (permalink)
GordonD MINI2 Master Join Date: Sep 2002 Location: Mississauga, Ont, Ca Local Time: 07:30 PM Posts: 781 Offline	Quote: Originally Posted by jionty Hope this link helps. It is to fit a aero grill but it does tell you also how to remove bumper: http://www.bridger.us/mini/howto/MIN...ll_install.pdf Thanks for this link. I can get to his main website bu the pdf stuff seems to be having problems. i will try another time. aka KWKSLVR Member: Southern Ontario MINI Club BMW Club of Canada - Trillium Chapter

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fitting A Cooper S Fuel Cap Without Removing Wheel/inner Panel	drumzz	Exterior	2	Dec 24th, 2006 04:23 PM
removing door panel. Window doesnt roll down	yellow02	Faults & Fixes	7	Nov 2nd, 2006 12:07 PM
back lower than front...	maxxx	Suspension	10	Jun 1st, 2006 09:20 AM
Removing dash panel	GTT 280	Faults & Fixes	1	May 30th, 2006 01:52 AM
HK amp wires - accessible w/o removing side panel?	Guy Gadbois	Interior & Ice	1	Nov 26th, 2005 04:41 PM

MINI2

Fuel for your MINI obsession

From bodykits to bonnet stripes, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Oct 12th, 2003, 12:15 PM	#2 (permalink)
jionty MINI2 Regular Join Date: Sep 2003 Location: London Local Time: 11:30 PM Posts: 107 Offline	Hope this link helps. It is to fit a aero grill but it does tell you also how to remove bumper: http://www.bridger.us/mini/howto/MIN...ll_install.pdf

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)