MINI2

azimmerm · Jan 6th, 2004, 01:22 AM

I just picked up my 04 MCS with rear fog lamps and i was curious if i can still do the brake light mod (jumping ports 1 and 4). Has anyone done this on a car with factory installed and programmed rear fogs?

Surfboy88 · Jan 6th, 2004, 01:34 AM

Yes...it's the same as using the jumper, except you use a diode that you can buy at Radio Shack.

I just did this mod 2 days ago, following the instructions on the link below.

Rear Fog Light Mod

It was easy. I used heat shrink tubing to make it a little neater, and put some subtle bends in the diode leads, so they'd make better contact with the side of the connector pin.

Good luck !

:: dave ::

Jan 6th, 2004, 01:22 AM	#1
azimmerm MINI2 Senior Join Date: Jun 2003 Location: Orlando, FL Local Time: 11:36 AM Posts: 447 Offline	Rear Fog Lamps & Brake Light Mod? I just picked up my 04 MCS with rear fog lamps and i was curious if i can still do the brake light mod (jumping ports 1 and 4). Has anyone done this on a car with factory installed and programmed rear fogs?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2004 rear fog lamps update	billiard	Exterior	15	May 23rd, 2004 06:01 AM
Using installed Rear Fog Lights as Fog + Extra Brake Lights. Possible?	averyocooper	Exterior	4	Mar 3rd, 2004 07:09 PM
Standard rear lamps & third brake	StevePSB	For Sale	0	Dec 18th, 2003 10:04 AM
Rear Fog Lamps in US!!	christockos	General Discussion	7	Oct 4th, 2003 09:43 PM

MINI2

Fuel for your MINI obsession

From bodykits to bonnet stripes, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jan 6th, 2004, 01:34 AM	#2 (permalink)
Surfboy88 2003 Liquid Yellow Cooper Join Date: Nov 2003 Location: San Diego, CA Local Time: 09:36 AM Posts: 34 Offline	Yes...it's the same as using the jumper, except you use a diode that you can buy at Radio Shack. I just did this mod 2 days ago, following the instructions on the link below. Rear Fog Light Mod It was easy. I used heat shrink tubing to make it a little neater, and put some subtle bends in the diode leads, so they'd make better contact with the side of the connector pin. Good luck ! :: dave ::

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)