MINI2

ShellyRN · Dec 19th, 2004, 06:41 PM

This is the first time that I posted here and I hope this post goes where it should.

Has anyone ever put quarters into the built in slots in the glove box door? The first time that I did and shut the door they all came out of there slots and some how managed to find there way between the two layers of the door. When the door is open and I tap on it I can hear the quarters jingle... Driving makes them rattle around. Does anyone know how to remove the inside portion or the outside portion of this door?

Thanks for any and all help,
Shelly

chris.lamb · Dec 20th, 2004, 01:12 PM

The Glove box inner & outer moldings are vibration welded together. This makes them impossible to separate without destroying one or both of them.
Suggest you take the lid off the glove box by removing the long hinge pin and try and shake the coins out the the sun glasses aperture or handle aperture.

luVlee · Dec 23rd, 2004, 04:00 PM

woah that's funny and terrible in both ways..I hope you get those bad boys out. By the way anyone else hear rattling from your glovebox lid even when just driving?? I think the unevenness of the roads and vibration made by the car noise itself makes the lid rattle..anyone else experience this? If so how would i fix it?

Dec 19th, 2004, 06:41 PM	#1
ShellyRN MINI2 Newbie Join Date: Dec 2004 Local Time: 12:23 PM Posts: 1 Offline	Glove box door problem This is the first time that I posted here and I hope this post goes where it should. Has anyone ever put quarters into the built in slots in the glove box door? The first time that I did and shut the door they all came out of there slots and some how managed to find there way between the two layers of the door. When the door is open and I tap on it I can hear the quarters jingle... Driving makes them rattle around. Does anyone know how to remove the inside portion or the outside portion of this door? Thanks for any and all help, Shelly

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to remove glove box door?	Corky	MINI Cooper	1	May 25th, 2007 03:13 PM
What is this in my Glove Box?	StorminNorm	Interior & Ice	8	Dec 9th, 2006 02:30 PM
glove box !!!	COOPER S KID	Interior & Ice	19	May 9th, 2006 11:15 PM
Glove-Box hatch problem	Mandi	Faults & Fixes	2	Aug 28th, 2003 07:10 PM
Glove box	stokey	Interior & Ice	9	Jan 17th, 2003 11:38 AM

MINI2

Fuel for your MINI obsession

From bodykits to bonnet stripes, discuss them here

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Dec 20th, 2004, 01:12 PM	#2 (permalink)
chris.lamb MINI2 Regular Join Date: Oct 2004 Location: Warwick Local Time: 09:23 PM Posts: 323 Offline	The Glove box inner & outer moldings are vibration welded together. This makes them impossible to separate without destroying one or both of them. Suggest you take the lid off the glove box by removing the long hinge pin and try and shake the coins out the the sun glasses aperture or handle aperture.

Dec 23rd, 2004, 04:00 PM	#3 (permalink)
luVlee MINI2 Lover Join Date: May 2004 Location: Montreal, Canada Local Time: 01:23 PM Posts: 422 Offline	woah that's funny and terrible in both ways..I hope you get those bad boys out. By the way anyone else hear rattling from your glovebox lid even when just driving?? I think the unevenness of the roads and vibration made by the car noise itself makes the lid rattle..anyone else experience this? If so how would i fix it?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)