Gauges on right pillar??

[zero_cool]

Hey everybody, I was just wondering if anybody has any pictures, or even better has a Mini themselves, that has gauges built into the main right hand (or left hand if left hand drive) piller (by the door). I am sure that I have seen this on a MINI before but cannot remember where. Thanks in advance.

[MINIMANIAUK]

hi these gauges are fitted to our mini cooper

[MINIMANIAUK]

hi best thing is to check out our site minimaniauk.com then deciede which gauges you want in the pod,fitting is fairley easy.Take a look at the site and see what you think

[insane*mini]

Am I missing something...or are you talking to yourself?

-Cody

[Rakey]

Quote: Originally Posted by insane*mini

Am I missing something...or are you talking to yourself?

-Cody

there were some posts removed that were self promoting and from a company that is not a sponsor

I've removed the replies now so it doesn't look like someone is talking to themselves

[MINIAC]

Quote: Originally Posted by zero_cool

Hey everybody, I was just wondering if anybody has any pictures, or even better has a Mini themselves, that has gauges built into the main right hand (or left hand if left hand drive) piller (by the door). I am sure that I have seen this on a MINI before but cannot remember where.

Seek and ye shall find

ALL forum titles for gauge pillar showing threads

[Woza]

Quote: Originally Posted by zero_cool

Hey everybody, I was just wondering if anybody has any pictures, or even better has a Mini themselves, that has gauges built into the main right hand (or left hand if left hand drive) piller (by the door). I am sure that I have seen this on a MINI before but cannot remember where. Thanks in advance.

ZeroCool

I have found the answer to your question
http://www.minispeed.co.uk/new_mini/...duct&id=mrb164

Look pretty cool.

[zero_cool]

Whoa. I leave this post for 5 minutes!! (sorry if I caused any trouble)

Thank you very much Woza.

[zero_cool]

And MiniAC

[insane*mini]

Quote: Originally Posted by Rakey

there were some posts removed that were self promoting and from a company that is not a sponsor

I've removed the replies now so it doesn't look like someone is talking to themselves

Thanks Rakey!!

Zero, might I ask what you will be using the gauges for? Tac, oil, temp, etc? I like the ones Woza posted, but you should deffinitly paint them to match the pillar.

-Cody

[Rakey]

Quote: Originally Posted by zero_cool

Whoa. I leave this post for 5 minutes!! (sorry if I caused any trouble)

Thank you very much Woza.

you didn't cause any bother

but glad I popped in here now, those gauges look

[zero_cool]

Quote: Originally Posted by insane*mini

Thanks Rakey!!

Zero, might I ask what you will be using the gauges for? Tac, oil, temp, etc? I like the ones Woza posted, but you should deffinitly paint them to match the pillar.

-Cody

To be totally honest Cody I am not too sure. How bad is that! . I am trying to get ideas together for my next project. This is not to go on my little one, bless her. This is to go on the next monster I am going to build. It will be something special I hope.

I will probably end up having boost and oil pressure. I agree that they must match the pillar. Might end up changing the pillars to black though.

Rakey I agree. They look great. Would ideally like 3. Just think it might look even better.