CNC pedals (got some more made) - MINI2

ULTMTE3 · #1 (**permalink**) Mar 20th, 2003, 06:31 AM

There was a thread that I started a two weeks ago about CNC pedals. There was some interest in getting some more made from various Mini2.com members.

We now have 12 complete sets. A set consists of a brake, gas, and clutch pedal with stainless steel hardware. 6 of the sets have the "S" as shown below ($70 w/shipping), and 6 of the sets are plain ($65 w/shipping). If you're interested, e-mail me. matteo92117@hotmail.com

Original Thread "Check these pedals out!"

We got a lot of request for the Dead Pedal to match. That was a great idea, but its been some work getting the shape just right in order for it to fit into the plastic frame 'just right'

. We should have that done next week some time.

Its been really fun doing this stuff after work, if you have any other suggestions or wants, that can be made from aluminum, let me know.

More picts at: Mini CNC Page

edlfrey · #2 (**permalink**) Mar 20th, 2003, 08:30 AM

Sign me up for a set of NO "s" WITH dead pedal when they are available.

ULTMTE3 · #3 (**permalink**) Mar 20th, 2003, 11:30 PM

By looking at my e-mails, I must finish up the dead pedal soon!

Just out of curiosity...
Of the pedals I have been shipping, we've been including both the allen wrench head and the philips head fasteners. Which do you think we should go with? Which look better?

We were thinking that everyone has the philips head tool, but not everyone has an allen wrench.

CT MINI · #4 (**permalink**) Mar 21st, 2003, 02:30 AM

Allen looks better, phillips is more common, but it's not like allen wrenches are hard to find. We just need to know the correct size, imperial/metric, etc.
Will the price change dramatically for the 4 pedal sets?
Is it difficult to remove the dead pedal?

ULTMTE3 · #5 (**permalink**) Mar 21st, 2003, 04:10 AM

Allens it is for now on.

The dead pedal is easily removed. The new pedal will require two small holes to be drilled into the plastic frame of the dead pedal.
Prototype should be done Friday afternoon!!

D.D. · #6 (**permalink**) Mar 21st, 2003, 04:34 AM

Allen head bolts look much better......Can't wait for the dead pedal to be done and my "S" set shipped!

ARitz · #7 (**permalink**) Mar 21st, 2003, 06:22 AM

Any chance of pedals for the CVT

? Those look great, keep up the good work.

-Andrew

ULTMTE3 · #8 (**permalink**) Mar 21st, 2003, 06:28 AM

CVT?
Constant Velocity Transmission?
Wouldn't it be an automatic configuration?
A bigger brake pedal?

Send me a drawing of what you want the pedals to look like and we can probably make them.

ARitz · #9 (**permalink**) Mar 21st, 2003, 07:00 AM

Oops sorry

,I meant the automatic. The only difference is the size of the brake pedal.

-Andrew

cosworth · #10 (**permalink**) Mar 23rd, 2003, 04:29 AM

Just mounted up mine, which I won off eBay. Look really sharp. Gotta get that dead-pedal now! Thanks Matt!

ULTMTE3 · #11 (**permalink**) Mar 24th, 2003, 09:00 AM

Finished the Prototype Dead Pedal!

You can see more pictures at:
CNC Mini Pedal Page

We should have some more made shortly.

scooterboy · #12 (**permalink**) Mar 24th, 2003, 08:17 PM

Any word as to whether the dead pedal surface can be brought up to the same plane as the other pedals?

scooterboy · #13 (**permalink**) Mar 25th, 2003, 02:40 AM

Just more convenient/quicker to move the foot from the dead pedal to the clutch pedal and back if they're at the same level, that's all.

And no, I wouldn't need the gas pedal raised. Never even thought about that idea actually.

monsta · #14 (**permalink**) Mar 25th, 2003, 02:55 AM

Those pedals could have spelt out M - I - N - I !

scooterboy · #15 (**permalink**) Mar 25th, 2003, 04:06 AM

Quote:

Originally posted by monsta
Those pedals could have spelt out M - I - N - I !

oooh, sweet idea. I'd buy a set!