Aero kit bumper stickers.

[KMK163]

Hello everyone. One simple question. I have purchased a new set of stickers that are mesh look alike for the aero kit rear bumper you know that are left and right from the exhaust.

I have tried to take off the old ones, but are very strong sticked on. Do you have any recommendation how to remove these stickers and does it have a high level of difficulty so i will take the car to a sticker specialist or can i do it myself.

Also do i put extra glue on the sticker? or i stick them on as they are. Thanks

[harrop]

tried a hairdryer?

[KMK163]

No i didnt i just try it with my hand and i figured out how hard they are on sticked.

[Banana Panceyette]

Just reiterating what Harrop has said really but they should come off if you apply some heat, mine did anyway

[GR33NIE]

I took mine off, applied some heat using a hairdryer then peeled the edge back Pulled the rest off quite easily then and mine were on there for over a year

[KMK163]

Ok guys i will try it. What about isntalling the new ones? Is there any special technique or method to use? Or its just simple stick on.?

[Baker]

You could also try a product called De-Solvit - its a citrus-y based product, doesn't damage paint at all, and neutralises the stickyness... I've used it (and got someone else to) use it with no worries on the Aero stickers.

[Fozzy]

Chill out. I removed mine last week, just pull them off with ure hand, and a knife to ease them off if needed

Takes a total of 2mins!

[MarkW19]

Quote: Originally Posted by Fozzy

Chill out. I removed mine last week, just pull them off with ure hand, and a knife to ease them off if needed

Takes a total of 2mins!

Remember some will come off easily, some will be much more difficult. It's the way it goes.

[Baker]

And then you've also got the leftover glue to deal with - the Desolvit does wonders on that

[nylo]

A little white spirit works wonders for that too