30-70mph 3rd gear times

[Paul@1320]

Our one is our NX nitrous controller made by FJO in Canada

Nitrous Express Downloads

Download this one, when you get the screen up then press monitor.

PC software (version 2.0.3)NX MAXIMIZER II"Advanced Analysis" SoftwareFixes issue with analysis screen*** requires firmware version 2.00 or higher ***

There are some excellent data loggers out there, we'll be testing one in a couple of weeks adapted for the Mini.

[Paul@1320]

You can see what I mean about the 15 v 17% when you see the timing being pulled back to 18 deg on the road at 5235rpm.

[MINI-Morgan]

Quote: Originally Posted by 1320autos (original)

You can see what I mean about the 15 v 17% when you see the timing being pulled back to 18 deg on the road at 5235rpm.

Yep 17% +1% crank too. Seems to range between 18-26 at the same point on the runs. There are a couple of -1s though Damn....

[Jaw_F430]

Had a go at 30-70 yesterday night.


1 run=6.0
2 run=6.1
3 run=6.2
4 run=6.5
5 run=5.9

Average=6.14

outside temp was 7 degrees C

[MINI-Morgan]

Quote: Originally Posted by Jaw_F430 (original)

Had a go at 30-70 yesterday night.


1 run=6.0
2 run=6.1
3 run=6.2
4 run=6.5
5 run=5.9

Average=6.14

outside temp was 7 degrees C

Some good times! What mods are you running?

I've knocked off the 6.5 as its way above the rest and called it 6.05 average.

[Fisher]

Which gearboy and tyres boys. That's important data

[Lucky Dave]

Sorry guys I have been snowed under with work at present and not been out to play!

I just need to get the rpm for 30 and 70 in 3rd, 4th, 5th and 6th then I can do all the runs and look at the data whilst sitting in front of the fire in my arm chair!

Im looking to improve my 30 -70 in 6th as I can pull like a train from 25mph in 6th now!!

Paul, most of the heavy hitters live near me, all our roads have bends in so this test is quite hard!

[Bhozar]

I'll do this as soon as I get my boost leak fixed, which is now getting worse.

[Rigsey]

Quote: Originally Posted by Bhozar (original)

I'll do this as soon as I get my boost leak fixed, which is now getting worse.

Out of interest, where is the leak coming from?

[Bhozar]

Quote: Originally Posted by Rigsey (original)

Out of interest, where is the leak coming from?

Intercooler-left horn clamp.

[Rigsey]

Quote: Originally Posted by Bhozar (original)

Intercooler-left horn clamp.

Do you have after market snoot boots?

[k m s]

Quote: Originally Posted by Lucky Dave (original)

Sorry guys I have been snowed under with work at present and not been out to play!

I just need to get the rpm for 30 and 70 in 3rd, 4th, 5th and 6th then I can do all the runs and look at the data whilst sitting in front of the fire in my arm chair!

Im looking to improve my 30 -70 in 6th as I can pull like a train from 25mph in 6th now!!

Paul, most of the heavy hitters live near me, all our roads have bends in so this test is quite hard!

If you get chance, you could try mine whilst you're at it as well

[Bhozar]

Quote: Originally Posted by Rigsey (original)

Do you have after market snoot boots?

Yep, GTT snoot boots, GRS intercooler.

[MINI-Morgan]

Quote: Originally Posted by Bhozar (original)

Yep, GTT snoot boots, GRS intercooler.

Does yours develop a film of oil on your snoot boots?

[Jaw_F430]

Quote: Originally Posted by MINI-Morgan (original)

Some good times! What mods are you running?

I've knocked off the 6.5 as its way above the rest and called it 6.05 average.

Hi

I'm running:

15% pulley+ reduced belt
JCW CAI
380cc injectors
NGK 7 plugs
JCW cat back exhaust
JCW Big GP Intercooler
Remap

Car weight= 2846lbs

Just need to sort out a manifold and hi flow cat that isn't too loud, as I have sold my ebay manifold and decat due to the noise

Regards

James